 |
Product PARTsolutions + eCAT: 11.00 SP4
Component _components/2D-Derivation
- Issue #74527 (PROBLEM): 2D thread 3/4 circle - visibility is partly wrong
- Issue #92891 (PROBLEM): "Markup element by two points" cannot be deleted
- Issue #95763 (PROBLEM): Problem with "Lines + shaded view" render mode in 2D derivation
- Issue #96309 (PROBLEM): Lines marked as cosmetic elements no longer visible in 2D derivation
- Issue #97115 (PROBLEM): Export Issue AutoCAD DWG 2D and DXF custom dimensions and Layout
- Issue #97293 (PROBLEM): Metav2 Set and Get Metalinetype (instead of calculation)
Component _components/3D-Assembly-Core
- Issue #91681 (PROBLEM): Allow feature colors and render materials -> Set color and / or material per feature to be valid for all feature surfaces (important for blends)
- Issue #93787 (PROBLEM): Types of sketch history elements seem to be not set correctly in all cases
- Issue #95129 (PROBLEM): Graphical glitch when there is collision between two blends
- Issue #96061 (PROBLEM): Cut Extrude - model is not cut properly
- Issue #96671 (PROBLEM): Sporadic crashes when creating geo index
- Issue #95275 (PROBLEM): PLMsynchro - part far away from origin can't be zoomed out
- Issue #95747 (PROBLEM): show Legacy Warning for OpenGL < 2.0
- Issue #96605 (PROBLEM): shader compiler of some drivers do not support conditional preprocessor directives
- Issue #97781 (PROBLEM): Texture not set on one face of a specific part
- Issue #98227 (PROBLEM): PARTdataManager crashes when dimension is taken and you switch the part
Component _components/Analysis-Purchineering
- Issue #32749 (ENHANCEMENT): Analysis summary views in Qt
- Issue #40839 (ENHANCEMENT): Show summary of filter options in analyses
- Issue #88025 (ENHANCEMENT): Show progress when loading an analysis in PARTdataManager
- Issue #90775 (ENHANCEMENT): Duplicate search with 64-bit server: enhance loading of the generated analysis
- Issue #96321 (ENHANCEMENT): Comparing of topological values
- Issue #96923 (PROBLEM): Analyses: short-term enhancements
- Issue #96925 (PROBLEM): Speedup loading analyses
- Issue #96935 (PROBLEM): Add option to ignore duplicates in same project
- Issue #98105 (PROBLEM): Unit problems when searching for files in make-or-buy search
- Issue #98319 (PROBLEM): Make or Buy export CSV does not report file name
- Issue #98321 (PROBLEM): Make or Buy report does not work if application server is enabled
- Issue #98363 (PROBLEM): Duplicate analysis: Getting the same results adding variable filter
- Issue #98491 (PROBLEM): Annotation filters broken
- Issue #98493 (PROBLEM): Try to synchronize tree and file view sorting
- Issue #98525 (PROBLEM): Memory not released after closing an analysis tab
- Issue #98597 (PROBLEM): Duplicate analysis: Export catalog - report to PDF error
Component _components/API (C++/VBS/COM)
- Issue #50947 (ENHANCEMENT): Add script function to create complete MIDENT
- Issue #95455 (ENHANCEMENT): wscript.shell with arguments and quotes difference v9.8 and v11?
- Issue #94207 (PROBLEM): Create proxy to get info how to display ranges
- Issue #95579 (PROBLEM): add method to fulltextsearchmodule to get tab filter for a project
- Issue #96741 (PROBLEM): PARTcommunity: Table filter from search does no longer work
Component _components/Compare View
- Issue #99019 (ENHANCEMENT): Open 3D files - dimensions not converted properly
- Issue #97123 (PROBLEM): Port part comparison to new table
- Issue #97675 (PROBLEM): Boolean operations do not work for native parts if live computation in open gl is turned off
- Issue #97863 (PROBLEM): Topology information wrong when adding parts to part compare
- Issue #98575 (PROBLEM): Problem with UNC Paths (Drag and Drop into part comparison)
- Issue #98643 (PROBLEM): Part comparison toolbar not updated correctly
- Issue #99035 (PROBLEM): Drag and drop from file explorer - empty dialog in PARTdataManager
- Issue #99101 (PROBLEM): Wrong units/values for class system values in part compare
Component _components/Documentation
Component _components/FullTextSearch
- Issue #92523 (ENHANCEMENT): Search by TypeCode / OrderNo
- Issue #98509 (ENHANCEMENT): Show hint for ordernr/typecode search in results
- Issue #99023 (ENHANCEMENT): Reverse Typecode Search: Pre-search over order numbers in CSV
- Issue #97717 (PROBLEM): Key word search does not work correctly when using the dialog
Component _components/GeomSearch
- Issue #29307 (ENHANCEMENT): Color Search and Geometrical Search should not exclude each other
- Issue #84947 (ENHANCEMENT): Can't cancel geometry load for compare or geosearch
- Issue #91867 (ENHANCEMENT): Filets and chamfers are not recognized in Topology information
- Issue #93133 (ENHANCEMENT): Rectangular patterns with holes rotated by 45° are not recognized.
- Issue #93371 (ENHANCEMENT): Partial search - Ignore specific attributes in search, e.g. cylinder lengths to find only holes with the same diameter, not length
- Issue #96323 (ENHANCEMENT): Rework filters on search columns
- Issue #97009 (ENHANCEMENT): Retrying failed conversion in geo search dialog does not work
- Issue #97463 (ENHANCEMENT): Display of color search results
- Issue #98329 (ENHANCEMENT): Color search: Grey seems to be closer to some colors than it may make sense for the users
- Issue #95491 (PROBLEM): Cylindrical segments below 360° are no search results in topo search, but they are selected when opening the part
- Issue #95567 (PROBLEM): Optimize fingerprint generation
- Issue #95633 (PROBLEM): Large mem leak when creating fingerprints for some parts
- Issue #96795 (PROBLEM): Hole patterns may not be found if difficult to separate
- Issue #97585 (PROBLEM): Inconsistent ERP line handling in geo search dialog/history
- Issue #97805 (PROBLEM): JT file cannot be converted for geosearch
- Issue #98781 (PROBLEM): Make tolerances for fall-back feature recognition on cad faces configurable
Component _exports/Mesh (STL/ZJV/3DS MAX/VRML/Collada...)
Component _exports/Neutral-3D (SAT/STEP/IGES/ParaSolid/...)
Component _exports/PDF (PDF/U3D/DataSheet/...)
- Issue #96761 (ENHANCEMENT): CADENAS PDF datasheet template BOM name variable should be removed
- Issue #92221 (PROBLEM): pdf datasheet technical view
- Issue #96263 (PROBLEM): Latest default PDF datasheet doesn't show Japanese letters correctly
- Issue #98523 (PROBLEM): Offline export CIBSE PDT does not work proper
Component _exports/Render (Maxwell Render/POVray)
Component _installer/Client-Server
- Issue #99003 (ENHANCEMENT): fix typo in parts4cad revit installer warning
- Issue #92739 (PROBLEM): Installer: Create Installer for Vectorworks 2017
- Issue #94813 (PROBLEM): Ship PLMSynchro scripts as default dependency of PARTdataCenter
- Issue #96297 (PROBLEM): Add CDE folder to SapEctr package
- Issue #96803 (PROBLEM): Installer for ArchiCAD 21
- Issue #97305 (PROBLEM): new files added with #95285
- Issue #98129 (PROBLEM): Windchill PDMLink for Creo and SolidWorks - Package not found
Component _installer/Single-User
- Issue #83977 (ENHANCEMENT): Create proxies for end of life (whole project and per line) for PCOM
- Issue #95145 (ENHANCEMENT): Separate HelpSystem from HelpWidget
- Issue #95161 (ENHANCEMENT): Remove file copy progresses
- Issue #95585 (ENHANCEMENT): Rework UI for Search usage in help system
- Issue #96917 (ENHANCEMENT): Error in initAddIn - OSNAME Var not set/OS default = Win-10
- Issue #93689 (PROBLEM): 3D preview length list
- Issue #94477 (PROBLEM): Appending to zip files does not work
- Issue #95841 (PROBLEM): Table proxy is slow
- Issue #96763 (ENHANCEMENT): start script after offline CD installation (for example CAD interface installer)
- Issue #96767 (ENHANCEMENT): adopt representation of CAD integration in PARTadmin
- Issue #95171 (PROBLEM): Offline CD - Cannot find file C: ...\custom\jt\7_0!
- Issue #95759 (PROBLEM): Offline CD title: formatting problem
Component eCAT/PARTcreator/HTML
Component eCAT/PARTdataManager/configurator
- Issue #82803 (ENHANCEMENT): Forbid color parts in assembly configurator
- Issue #97355 (ENHANCEMENT): Sort Parts in Configurator and change Equation name
- Issue #97735 (ENHANCEMENT): Properties are missing in Configurator window
- Issue #97737 (ENHANCEMENT): Show links - arrow could be useful
- Issue #97749 (ENHANCEMENT): "Insert..." function on connection point
- Issue #97765 (ENHANCEMENT): Three dots missing
- Issue #97771 (ENHANCEMENT): Add confirmation dialog when you delete parts
- Issue #97787 (ENHANCEMENT): Option list is wide
- Issue #97797 (ENHANCEMENT): Single click on part in option list should load table
- Issue #97799 (ENHANCEMENT): Opening template project should load DUMMY table
- Issue #59361 (PROBLEM): Number of parts given to partition map doesn't match number of search results
- Issue #93739 (PROBLEM): Opening new configurator will close old without saving it
- Issue #95601 (PROBLEM): Rework Assembly Rule Tree to Qt
- Issue #95603 (PROBLEM): Rework Assembly Instance Tree to Qt
- Issue #95607 (PROBLEM): Create centralised selection manager for part/cp selection in assdistr
- Issue #97739 (PROBLEM): Crash when you add new part to the configuration
- Issue #97761 (PROBLEM): "Value range assignment" context menus
- Issue #97811 (PROBLEM): Configuration with configurator as start element could not be opened
- Issue #97873 (PROBLEM): Problem if we don't select a row from sub-part
- Issue #98211 (PROBLEM): It is not possible to save simulation motion profile correctly (comma / dot issue)
- Issue #98235 (PROBLEM): "Start element" should be shown only once if asking for table selection
- Issue #98257 (PROBLEM): Opening Simulation dialog will crash PARTdataManager
- Issue #98271 (PROBLEM): Exclusive part could not be loaded
- Issue #98335 (PROBLEM): "Start element" could not be loaded after you add it
- Issue #19471 (ENHANCEMENT): "Rows to add" choice and "Rows selected" indicator
- Issue #65525 (ENHANCEMENT): Remove "Format Version" edit field in ID data dialog
- Issue #79687 (ENHANCEMENT): Resolve value range doesn't work in some cases
- Issue #84177 (ENHANCEMENT): Color added in PARTproject is not displayed on 3D model in PARTdesigner
- Issue #84229 (ENHANCEMENT): Improve look of Reference point for rotated pattern and Pattern origin points
- Issue #94139 (ENHANCEMENT): Geometry data - Description of geometry dialog
- Issue #94353 (ENHANCEMENT): Allow to handle illegal variable names to some extent
- Issue #94449 (ENHANCEMENT): Possible to have zoom on face which we sketch on in 3D
- Issue #94673 (ENHANCEMENT): List of attribute algorithms and value ranges
- Issue #94799 (ENHANCEMENT): Highlighting on hovering features in 3D History
- Issue #94839 (ENHANCEMENT): Rotate 3D view perpendicular to the new sketch
- Issue #94863 (ENHANCEMENT): "Delete" key on keyboard have no function
- Issue #94909 (ENHANCEMENT): Add "Set mark" option to Sketcher
- Issue #95321 (ENHANCEMENT): Recalculate intersection list before and after reassigning reference point
- Issue #95347 (ENHANCEMENT): Some windows open and close again when you open the sketcher
- Issue #95559 (ENHANCEMENT): Connection points as triangles
- Issue #95655 (ENHANCEMENT): Show "rotate connection points" checkbox when the function is disabled in cfg but used in loaded sketch
- Issue #95685 (ENHANCEMENT): Creating new variable with name similar to already existing
- Issue #95701 (ENHANCEMENT): Add icons to status drop down dialog
- Issue #95777 (ENHANCEMENT): Equation right click menu
- Issue #95893 (ENHANCEMENT): Show cursor coordinates and additional info in sketcher status bar
- Issue #96005 (ENHANCEMENT): Saving without Standard title entered not possible
- Issue #96013 (ENHANCEMENT): Debug table crashes / Parsing error in algorithm
- Issue #96023 (ENHANCEMENT): Adding variable from table to geometry
- Issue #96069 (ENHANCEMENT): Right click menu commands don't work in algorithm
- Issue #96117 (ENHANCEMENT): Face attributes dialog - in opening help dialog, hyperlink does not work
- Issue #96181 (ENHANCEMENT): Select all surfaces on multiple actions
- Issue #96217 (ENHANCEMENT): Don't show empty tooltips in Sketcher
- Issue #96453 (ENHANCEMENT): Change "Mirror selection" to "Mirror"
- Issue #96519 (ENHANCEMENT): Copy of empty and filled cells from Excel to eCAT Table
- Issue #96523 (ENHANCEMENT): Possibility to manage the views in PARTdesigner
- Issue #96891 (ENHANCEMENT): Rename "Against surface normal" to "Opposite direction"
- Issue #96983 (ENHANCEMENT): Commit obligated after algorithm editing
- Issue #97087 (ENHANCEMENT): No table line is selected when opening an existing *.3db
- Issue #97831 (ENHANCEMENT): Icon on value range variable is not visible unless you click on entire line
- Issue #97891 (ENHANCEMENT): prohibit creating blends in combination with sweeps or allow reading the face relations of sweeps
- Issue #98101 (ENHANCEMENT): Sketcher - Use Del key to: Delete element or Delete step does not work
- Issue #98219 (ENHANCEMENT): Reload sketcher options after changes have been made in settings dialog
- Issue #98665 (ENHANCEMENT): PARTdesigner - Setting face attribute rendering over variable
- Issue #84193 (PROBLEM): Saving should not be possible on any QA state
- Issue #89347 (PROBLEM): PARTdesigner Sketch is first not visible
- Issue #92713 (PROBLEM): Connection point names are not displayed in sketcher view
- Issue #93827 (PROBLEM): Improve save handling in 2D mode
- Issue #94635 (PROBLEM): Thread tool - real-time options changing
- Issue #94675 (PROBLEM): Mathematical function in table doesn't work
- Issue #94703 (PROBLEM): Debugger does not load some variable values
- Issue #94809 (PROBLEM): Add selection/Remove selection does not work
- Issue #94815 (PROBLEM): "Mark dependent elements" does not exist in v11
- Issue #94827 (PROBLEM): Highlight element in Sketch history on hover
- Issue #94949 (PROBLEM): Missing information message when a sketch could not be created on face
- Issue #95071 (PROBLEM): Modifications from context menu don´t modify the undo stack
- Issue #95109 (PROBLEM): Disable loading of new 3DB when sketcher is opened
- Issue #95135 (PROBLEM): "New drawing" menu option missing
- Issue #95169 (PROBLEM): Balloon tip for blend preview settings
- Issue #95183 (PROBLEM): Error notification when editing already created value range
- Issue #95185 (PROBLEM): Preview of imported sketch is only displayed once
- Issue #95295 (PROBLEM): "Read-only" notification when such file is opened
- Issue #95323 (PROBLEM): Add maximize button to Debugger window
- Issue #95399 (PROBLEM): Crash when you try to save after a file could not be loaded
- Issue #95795 (PROBLEM): Selection changed when variable is committed
- Issue #95823 (PROBLEM): "Select faces" dialog can be opened multiple times
- Issue #95877 (PROBLEM): Connection points could not be selected in 3D
- Issue #95907 (PROBLEM): Variable manager sorting does not work
- Issue #95939 (PROBLEM): Error when attribute algorithm use value from other variable
- Issue #96019 (PROBLEM): Rename should also rename variable in other algorithms and value ranges
- Issue #96041 (PROBLEM): Sketcher color settings, can't be changed
- Issue #96081 (PROBLEM): Blend Edges - Graphical glitches
- Issue #96089 (PROBLEM): Transparent plane highlighting on hover
- Issue #96107 (PROBLEM): Measure Dialog - selection not working properly
- Issue #96125 (PROBLEM): Problem if you input comma as cell value
- Issue #96329 (PROBLEM): Crash when you try to edit a sketch whose face relation is invalid
- Issue #96333 (PROBLEM): When multiple 3DBs are defined in a project only the variables of the first are shown
- Issue #96373 (PROBLEM): "Save as..." in PARTdesigner should be always available
- Issue #96407 (PROBLEM): Sort table variables - Moving multiple variables at once does not work correctly
- Issue #96477 (PROBLEM): Not complete functionality of black square in table
- Issue #96689 (PROBLEM): Attribute algorithm - Choosing a variable doesn't set correct syntax
- Issue #96705 (PROBLEM): Function of duplicating rows not working as in v10
- Issue #96711 (PROBLEM): Drag-copy not working as in v10
- Issue #96895 (PROBLEM): Problem with intersection when sketch is changed
- Issue #96971 (PROBLEM): New drawing based on 2D derivation or sketch is not zoomed correctly
- Issue #97143 (PROBLEM): Condition of plane does not work correctly
- Issue #97277 (PROBLEM): DXF-Import in 2db - Options are not working
- Issue #97447 (PROBLEM): Manually entered units are not displayed correctly
- Issue #97823 (PROBLEM): Resolve value ranges does not resolve all chosen value ranges in one step
- Issue #97853 (PROBLEM): Debugger does not sort the variables in alphabetical order
- Issue #98057 (PROBLEM): Newly added variable to geometry could not be saved
- Issue #98159 (PROBLEM): Condition on sweep doesn't work
- Issue #98221 (PROBLEM): Sketcher Layout in V11 not good and not saved when changed.
- Issue #98395 (PROBLEM): Show and delete function of unused variables in tab or 3db missing
- Issue #98431 (PROBLEM): ERROR in sketch : V11 OK vs V10 NOT OK
- Issue #98457 (PROBLEM): Import table from CSV doesn't work correctly
- Issue #98583 (PROBLEM): TAC files cannot be saved unencrypted
- Issue #98599 (PROBLEM): Change in value range before selection a line, create new table line
- Issue #98681 (PROBLEM): Import Sketch with connection points changes the name of connection points
- Issue #98769 (PROBLEM): Using Variables for coloring in 3db
- Issue #98903 (PROBLEM): Changing condition on planes does not update tree icon
- Issue #98937 (PROBLEM): Value range equation change will cause multiple errors
- Issue #98943 (PROBLEM): thread selection in sketcher can cause program freeze
- Issue #98979 (PROBLEM): Renaming value range
- Issue #38815 (ENHANCEMENT): Load subversion status in background thread in PARTproject
- Issue #45881 (ENHANCEMENT): Project dependencies - maximize button
- Issue #91957 (ENHANCEMENT): Use application icon for dialogs
- Issue #94519 (ENHANCEMENT): CIP Generation: Releasenotes.xml entry <release> not counted..
- Issue #95139 (ENHANCEMENT): 2db files could not be opened via double click
- Issue #95361 (ENHANCEMENT): Wrong direction of arrows to sort attributes
- Issue #95811 (ENHANCEMENT): EOL per line dialog - does not discontinue status does not work
- Issue #95813 (ENHANCEMENT): EOL per line dialog - remove no expiration date checkbox
- Issue #95879 (ENHANCEMENT): Enable multithreading in svnfilesystem / serf
- Issue #96109 (ENHANCEMENT): Move Folder -- Source and Destination wrong path
- Issue #96405 (ENHANCEMENT): Add "Assistant" -new class for Release notes
- Issue #96609 (ENHANCEMENT): Create materials from color - resizing columns
- Issue #97149 (ENHANCEMENT): Creating new configurator will add bmp as preview file
- Issue #97213 (ENHANCEMENT): Add "Miscellaneous" -new class for Release notes
- Issue #97639 (ENHANCEMENT): Mapping.json not checked out on subfolder catalogs e.g. norm
- Issue #98037 (ENHANCEMENT): ERP Mapping - Mapping value ranges with obsolete ranges
- Issue #98041 (ENHANCEMENT): ERP Mapping - Mapping value range witch changed values
- Issue #98133 (ENHANCEMENT): Problem with creation of ERP mapping
- Issue #98675 (ENHANCEMENT): SVNQAConf Plugin can't open a SOAP connection to eCAT SVN
- Issue #83153 (PROBLEM): Filtered project links not working if opened from PARTproject
- Issue #90921 (PROBLEM): Media variable value are not correctly shown in PRINTcatalog tab
- Issue #93909 (PROBLEM): Write license to 3db files when separating catalogs
- Issue #93995 (PROBLEM): Generate image preview - Maxwell format
- Issue #94981 (PROBLEM): "X must be lower than Y" notification when adding ERP mappings
- Issue #95097 (PROBLEM): 3D view in PARTproject is very slow
- Issue #95635 (PROBLEM): Files referenced from custom dimension views missing in PARTproject tree
- Issue #96015 (PROBLEM): Making automatic dimension in assembly table project causes error in template
- Issue #96095 (PROBLEM): Internal error during ERPMapping in V11
- Issue #96419 (PROBLEM): Link Projects should also be able to filter for Value Ranges
- Issue #96607 (PROBLEM): Create materials from color sorting for "Amount" is alphabetical
- Issue #96627 (PROBLEM): I can't remove 2DB variation
- Issue #96863 (PROBLEM): Handle relative paths with catalog when creating ERP mappings
- Issue #96879 (PROBLEM): Allow to edit mappings that were created from a cip
- Issue #96981 (PROBLEM): Variable translation problem
- Issue #97163 (PROBLEM): After renaming projects translations are missing
- Issue #98021 (PROBLEM): Crash in PARTProject when selecting a directory containing an mxs file and immediately selecting another directory afterwards
- Issue #98225 (PROBLEM): Catalog separator should not update dates
- Issue #98613 (PROBLEM): Preview for new created 3db should be empty
Component eCAT/PARTproject/Quick and Simple
- Issue #43017 (ENHANCEMENT): [QS] Quick&Simple : katalog.bmp rename to catalog.bmp
- Issue #97103 (ENHANCEMENT): add option for setting author in GUI to VDI 3805 importer
- Issue #97215 (ENHANCEMENT): set default language for VDI 3805 importer
- Issue #97033 (PROBLEM): STEP assembly with rebuild errors is imported exploded
- Issue #97105 (PROBLEM): VDI 3805 importer - Preview can not be generated
- Issue #83313 (ENHANCEMENT): Testmeta should find unused folder bmp files
- Issue #94973 (PROBLEM): Q&S projects can't pass testmeta
- Issue #95985 (PROBLEM): Test Meta shows additional Errors and Warnings
- Issue #96037 (PROBLEM): Error in Test META for same .prj with one Order number
- Issue #96101 (PROBLEM): Wrong warning message that variable is not used
- Issue #96105 (PROBLEM): Testing project previews
Component LinkDB/PARTdataManager
- Issue #85437 (ENHANCEMENT): Table view for search results is missing colors in ERP variable columns
- Issue #88631 (ENHANCEMENT): Make Erp Scripts ready for configurations
- Issue #95039 (PROBLEM): The PARTdataManager UI is lagging
- Issue #96655 (PROBLEM): erp_sorttable.vbb - Settings don't have any effect - Table will not be sort
- Issue #97399 (PROBLEM): Irritating icons in vertical table
- Issue #97495 (PROBLEM): PLMTABLE document list dialog does not select correct line when precision of numeric values is different
- Issue #97513 (PROBLEM): Can't add valve terminals to link database
- Issue #98591 (PROBLEM): If database is on different VM there is an error when adding ERP number. Standard installation.
- Issue #98935 (PROBLEM): Syntax error - erp_duplicate_check.vbb on export
Component LinkDB/PARTlinkManager
- Issue #86945 (ENHANCEMENT): After change in config is done next line is edited
- Issue #94597 (ENHANCEMENT): License tab cannot be resized horizontally
- Issue #94661 (ENHANCEMENT): ifcnsteamcenter.cfg - config editor - TC_ItemID not shown in description box
- Issue #95243 (ENHANCEMENT): PARTadmin ConfigEditor eats letters from VALS_M comments
- Issue #95989 (ENHANCEMENT): Add "Rename" to context menu in config editor
- Issue #97493 (ENHANCEMENT): Improve handling of ComboBoxes in config editor
- Issue #98503 (ENHANCEMENT): PARTadmin - AppServer Service on default opens second tab
- Issue #95793 (PROBLEM): Quotation marks are hidden in PARTadmin, present in cfg
- Issue #96881 (PROBLEM): PARTadmin window lock our customer's machine
- Issue #97027 (PROBLEM): Show file names of SITESETUP config when an error occurs while saving
Component PSol/PARTadmin/Index
Component PSol/PARTadmin/OfflineUpdate
Component PSol/PARTadmin/OnlineUpdate
Component PSol/PARTapplicationServer
- Issue #90015 (ENHANCEMENT): Reverse Partnumber Functionality: Limit resolving of yellow fields
- Issue #98123 (PROBLEM): AppServer: Add plugin mechanism to appserveradmin dashboard
- Issue #98449 (PROBLEM): Invalidate table cache for table module when adding new ERP-Numbers
- Issue #99031 (PROBLEM): Filter assistants on b2b are broken
Component PSol/PARTdataManager
- Issue #22306 (ENHANCEMENT): Rename the settings points colour to line settings
- Issue #28506 (ENHANCEMENT): Columns options in the search should be adjusted and sorted like the standard search
- Issue #41777 (ENHANCEMENT): Filter table like excel (keep line numbers)
- Issue #62635 (ENHANCEMENT): Cleanup obsolete code
- Issue #62711 (ENHANCEMENT): PARTdataManager - search in new tab button improvement
- Issue #81197 (ENHANCEMENT): Stylesheets widget enhancements
- Issue #83871 (ENHANCEMENT): Autocomplete for live search improvement
- Issue #84417 (ENHANCEMENT): Add compare with search part to table context menu
- Issue #86703 (ENHANCEMENT): Can't use multiple search filters at once
- Issue #87003 (ENHANCEMENT): Allow to select filtered values in 3D dimensions
- Issue #89261 (ENHANCEMENT): How to use window settings in V10
- Issue #92471 (ENHANCEMENT): "Edit in PARTproject" option in PARTdataManager
- Issue #94515 (ENHANCEMENT): Quick compare "Show for all" column and button appears when no search results in geosearch
- Issue #94927 (ENHANCEMENT): Automatic dimensions not updating on V11 dimension editor
- Issue #94977 (ENHANCEMENT): Opening project in PARTdataManager from PARTproject does not open correctly in part selection
- Issue #95629 (ENHANCEMENT): Color execution column
- Issue #95769 (ENHANCEMENT): Small typing error in Extras/Settings/Part Selection
- Issue #96155 (ENHANCEMENT): Limited rows on value range selection
- Issue #96171 (ENHANCEMENT): Modular System -table cannot be change
- Issue #96353 (ENHANCEMENT): active preferred button ——Assembly body ——disappear
- Issue #96457 (ENHANCEMENT): Remember last used location when loading VBS scripts
- Issue #96665 (ENHANCEMENT): Iteration via project table with View table error message
- Issue #96687 (ENHANCEMENT): Scrollbars in the settings widget
- Issue #96931 (ENHANCEMENT): Rework erp_duplicate_check
- Issue #97299 (ENHANCEMENT): Improve natural sort
- Issue #97403 (ENHANCEMENT): Enhance single click behaviour
- Issue #99109 (ENHANCEMENT): Topology search in Inch value displayed in result not matching the search
- Issue #65145 (PROBLEM): "Folder up" in index does not save the position
- Issue #68675 (PROBLEM): Crash when trying to load an assembly with defect part
- Issue #85865 (PROBLEM): After saving a search in favorites, the node is not selected
- Issue #86549 (PROBLEM): Unwanted behaviour of PARTdataManager
- Issue #87147 (PROBLEM): PARTcomparison - wrong value when unit = inch
- Issue #90183 (PROBLEM): Function keys are not working directly after startup
- Issue #90525 (PROBLEM): Custom dock is lost after recovering window standard
- Issue #90545 (PROBLEM): Column sorting in search results requires two clicks to change
- Issue #90689 (PROBLEM): Highlighted catalog is selected after switching tabs
- Issue #90933 (PROBLEM): INFOTEXT in replace_std.cfg is not always evaluated
- Issue #91251 (PROBLEM): 3D - Zoom on window doesn't work
- Issue #92317 (PROBLEM): Class 2.0 3D preview not visible if the project has no technical previews
- Issue #93265 (PROBLEM): Changing symbol size navigates into the selected folder
- Issue #94123 (PROBLEM): Cannot enable preview per line in native catalog
- Issue #94695 (PROBLEM): Batch export dialog - log file path dialog is "Open" dialog instead of "Browse"
- Issue #94891 (PROBLEM): PARTconnection - unspecified configuration error
- Issue #95011 (PROBLEM): Variables classification part information is not resolved
- Issue #95041 (PROBLEM): Problems with auto complete view
- Issue #95051 (PROBLEM): Prevent the user from editing dimensions of configurations
- Issue #95283 (PROBLEM): Highlight search results of QA-Seal catalogues
- Issue #95331 (PROBLEM): Automatic Dimension - Ascending order is not in order
- Issue #95363 (PROBLEM): Typing values in slider of class 2.0 sets wrong values to slider
- Issue #95539 (PROBLEM): Table border colors not evaluated in V11
- Issue #95565 (PROBLEM): Result view widgets missing in search results
- Issue #95577 (PROBLEM): Variable description missing in filter assistant
- Issue #95593 (PROBLEM): CloudNavigator crashes PARTdataManager
- Issue #95595 (PROBLEM): When switching between horizontal and vertical table the erp icons are sometimes not correct
- Issue #95699 (PROBLEM): Improve slider behaviour in vertical table
- Issue #95743 (PROBLEM): Resizing Topology column in search makes PARTdataManager unresponsive
- Issue #95799 (PROBLEM): Problem adding Solid Edge parts to part comparison
- Issue #95847 (PROBLEM): Invisible button in exploded view dialog
- Issue #96003 (PROBLEM): PARTcomparison not working for CPV10-EX valve terminal
- Issue #96163 (PROBLEM): Minidump while opening a native part - Error only occurred once
- Issue #96331 (PROBLEM): can't disable "search in new tab" on new tabs
- Issue #96355 (PROBLEM): Table is not blocked anymore when opening table from part comparison
- Issue #96465 (PROBLEM): Opening parts from analyses loses selection
- Issue #96487 (PROBLEM): PARTcomparison not working for valve terminal after trying to make them ERP ready
- Issue #96509 (PROBLEM): INCH 3D bearing project could not be opened
- Issue #96517 (PROBLEM): Unhandled exception for valve terminals in part comparison
- Issue #96675 (PROBLEM): Sketch search dialog history previews are not realistic
- Issue #96899 (PROBLEM): Proxy: Mapping between eclass numbers (e.g. eclass7.0-->eclass8.0);
- Issue #96985 (PROBLEM): Value range - upper value not working in all cases
- Issue #97051 (PROBLEM): Start in favorites view
- Issue #97173 (PROBLEM): Hidden projects visible in History after opened through search
- Issue #97221 (PROBLEM): Unhandled exception after filtering table
- Issue #97327 (PROBLEM): Popup doesn't close
- Issue #97381 (PROBLEM): crash (internal error) during psol start when closing Links and BOM widget in part view
- Issue #97437 (PROBLEM): INTERNAL: when scrolling through search results PSOL crashes with dump
- Issue #97453 (PROBLEM): Open by mident does not show the mident of valve terminals
- Issue #97545 (PROBLEM): NB is not translated
- Issue #97759 (PROBLEM): Length of URL in integrated browser seems to be limited
- Issue #97933 (PROBLEM): Error when switching to partition map
- Issue #98263 (PROBLEM): Generating previews for directories also replaces project previews
- Issue #98347 (PROBLEM): Part view looks strange with default settings
- Issue #98349 (PROBLEM): replace_std.cfg: Export key doesn't work
- Issue #98567 (PROBLEM): Parts have red lined edges in 3d view
- Issue #98793 (PROBLEM): pdatamgr.exe + CAD crashes if started from interface
Component PSol/PARTvbsCompiler
Component WareHouse/ArticleAssignment
- Issue #95951 (PROBLEM): Add scheduled tasks to run pipelines at a user-defined time
- Issue #95953 (PROBLEM): Debug view: Add a full fledged JSON viewer to better visualize the output
- Issue #95955 (PROBLEM): Debug view: Add a warning if breakpoints are set, but the pipeline is ran in cloud
- Issue #95961 (PROBLEM): Backups: Improve the backup handling
- Issue #96007 (PROBLEM): Starting a cloud-based job deadlocks PARTdataCenter if PARTapplicationServer has no license
Component WareHouse/DuplicateAnalysis
- Issue #87731 (ENHANCEMENT): Add help tooltips to pipeline nodes
- Issue #98565 (ENHANCEMENT): Possibility to load JSON Structure of DTOs in MultiSelectionWidget without Pipeline
- Issue #91765 (PROBLEM): Add preconfigured filters to filter selection
- Issue #95191 (PROBLEM): Sometimes mini view and edges are not shown correctly in pipeline
- Issue #95571 (PROBLEM): Change AttributeValue Type in Product after changing Attribute Type
- Issue #95853 (PROBLEM): Use natural Sort for sorting in product list
- Issue #96473 (PROBLEM): Avoid using setDirty() in each setProperty implementation
- Issue #97139 (PROBLEM): Problems csv Import
- Issue #97847 (PROBLEM): Rework view definition loading
- Issue #98889 (PROBLEM): Duplicated debug context menu in PARTdataCenter
Component WareHouse/PLM Synchro
- Issue #93847 (ENHANCEMENT): PARTdataCenter - hide PLM Synchro/show error notification when PLMsynchro is not installed
- Issue #94613 (ENHANCEMENT): Dashboard: Show pipeline overview with parent dependencies
- Issue #95033 (ENHANCEMENT): Wizard: Correctly set "Download instances" depending on the selected interface
- Issue #95287 (ENHANCEMENT): Query: Use new paging mechanism in PW
- Issue #96325 (ENHANCEMENT): Test of the additional files function in NX/Teamcenter
- Issue #96401 (ENHANCEMENT): Wizard defaults to Capvidia cp when custom parasolid cp is used
- Issue #67465 (PROBLEM): 'Negative body' visible in preview
- Issue #93381 (PROBLEM): pdc plm synchro with import to pwserver
- Issue #94031 (PROBLEM): stl and jt missing as input format
- Issue #94837 (PROBLEM): Query builder: Can't add another top-level query if we already have a group
- Issue #95095 (PROBLEM): Dashboard: SysInfo still reloads every time even if page is not visible
- Issue #95113 (PROBLEM): Dashboard: MemLeak - While PLMsynchro import pbrowser.exe needs more than 5 GB
- Issue #95189 (PROBLEM): Possibility to create not runnable Pipeline with PLM Synchro Wizard
- Issue #95835 (PROBLEM): Enhance handling if app server crashes
- Issue #95905 (PROBLEM): Free pipeline data in app server after some time
- Issue #95913 (PROBLEM): PLMsynchro/Conversion: Timeout might kill the pipeline host
- Issue #95987 (PROBLEM): Wizard: Path to new project should be a folder picker
- Issue #96303 (PROBLEM): Download node: Add new download node to download additional files
- Issue #97301 (PROBLEM): PLMsynchro Query shows error notification
- Issue #98155 (PROBLEM): Inventor/Windchill - PLMSynchro - import family instances using CAPVIDIA
- Issue #98267 (PROBLEM): Assembly parts duplicated in root catalog folder
- Issue #98283 (PROBLEM): Parasolid files: size of imported data become 1/1000 using "mm" unit.
- Issue #98307 (PROBLEM): PLMSynchro FSO - extremely slow SW performance
- Issue #98309 (PROBLEM): Catch termination of pipeline hosts
- Issue #98429 (PROBLEM): PLMSynchro FSO - OSDM import structure wrong when importing from subfolders
- Issue #98687 (PROBLEM): Conversation path in PLMsynchro is not set on default for exact file format
- Issue #98787 (PROBLEM): PLMsynchro distributed conversion does not work
- Issue #98791 (PROBLEM): NX should not be closed automatically after plms import
- Issue #98803 (PROBLEM): wrong attribute ID
- Issue #98805 (PROBLEM): no pw classification parameters visible in regEx Node
- Issue #98809 (PROBLEM): regEx node doesn't add new parameters to pw classification
- Issue #98813 (PROBLEM): pipeline dependant batch mode
- Issue #98837 (PROBLEM): import process doesn't use existing CAD session
- Issue #99123 (PROBLEM): Implement Permissions for PLM synchro (Service)
Component WareHouse/StructureAndClassify
- Issue #24968 (ENHANCEMENT): Color tree after autoclassify to show where changes were made
- Issue #53707 (ENHANCEMENT): ignore errors during zjv generation
- Issue #57723 (ENHANCEMENT): Possibility to connect automatically at second start
- Issue #95727 (ENHANCEMENT): PLMsynchro pipeline - Stopping does not work instantly
- Issue #98015 (ENHANCEMENT): PARTdataCenter - flag is missing in class creation window
- Issue #98495 (ENHANCEMENT): ComplexMultiSelectComboBox used in filter settings returns wrong values
- Issue #98639 (ENHANCEMENT): PARTdataCenter - add product button should be grayed out or not show on "Classing results"
- Issue #98671 (ENHANCEMENT): PARTdataCenter - Drag&drop of products in PARTdataCenter closes folder tree
- Issue #98745 (ENHANCEMENT): PARTdataCenter - can't add individual products to Training-sets
- Issue #98749 (ENHANCEMENT): ClassingResult and TrainingSet Tabs - Empty hints are wrong
- Issue #98859 (ENHANCEMENT): PARTdataCenter - can edit identification when creating attribute
- Issue #63389 (PROBLEM): PARTdatacenter - remove catalog doesn't work
- Issue #74945 (PROBLEM): PARTdatacenter - NoType attribute creation
- Issue #92785 (PROBLEM): PLMsynchro pipeline - visual cue of selected data source not working properly
- Issue #94773 (PROBLEM): sort order pdc and psol not the same
- Issue #95215 (PROBLEM): PLMsynchro pipeline - Deactivating plugins in view, they are still shown in dashboard
- Issue #95233 (PROBLEM): Taskbar icon enhancement for some components
- Issue #95857 (PROBLEM): Classification wizard Tetra Pak
- Issue #95859 (PROBLEM): Class wizard: check for truncated values in the UI
- Issue #95861 (PROBLEM): Class wizard: show attribute units
- Issue #95863 (PROBLEM): Class wizard: revise attribute mappings
- Issue #95865 (PROBLEM): Class wizard: handle Linkdb
- Issue #95867 (PROBLEM): Class wizard: handle additional documents
- Issue #98485 (PROBLEM): Classification Wizard throws minidump after clicking on classify
- Issue #98823 (PROBLEM): problems in import dialog
- Issue #98945 (PROBLEM): PARTdataCenter - linked psol projects sometimes crash PARTdataCenter
Product PARTsolutions Interfaces: 11.00 SP4
Component CAD / All / CADPROXIES
Component CAD / All / CAPVIDIA
- Issue #66985 (ENHANCEMENT): Add license manager dialog to seamless
- Issue #93653 (ENHANCEMENT): "Replace" and "Insert repeatedly" dialogue can be opened while they are already opened
- Issue #95339 (ENHANCEMENT): Allow Additional Files also an ASM level
- Issue #95401 (ENHANCEMENT): Transfer Connection Point Attributes to bmecat.xml creation
- Issue #95735 (ENHANCEMENT): Update icons
- Issue #95975 (ENHANCEMENT): LIVEsearch branding on the dialog when activating/deactivating
- Issue #95245 (PROBLEM): Disable Live Search button until seamless is started
- Issue #96897 (PROBLEM): OSDM partial search, PARTdataManager not brought into foreground
- Issue #96955 (PROBLEM): LOD switching in NX not always possible
- Issue #98173 (PROBLEM): Triangulation settings for Mesh output on Benchmark with Parasolid/Hoops
- Issue #98391 (PROBLEM): Proxy Configuration Files changed
- Issue #98437 (PROBLEM): Add compound features to import from parasolid
Component CAD / All / Installation
Component CAD / All / Seamless
- Issue #76743 (ENHANCEMENT): Add option to delete error messages
- Issue #90413 (ENHANCEMENT): parts4cad: Will this work with 2D systems too?
- Issue #95945 (ENHANCEMENT): Missing/Broken VBS Callback OnProjectPreload, add OnBeforeProjectOpen to seamless
- Issue #96135 (ENHANCEMENT): parts4cad (Tenado): Support 2D formats
- Issue #96137 (ENHANCEMENT): parts4cad (Tenado): Add 32-bit exe/dll
- Issue #96139 (ENHANCEMENT): parts4cad (Tenado): Multiple installations of parts4cad should not interfere -> start script will restart running parts4cad if not same api key
- Issue #96141 (ENHANCEMENT): parts4cad (Tenado): Support licenses products by passing the api key depending on the CAD system
- Issue #97091 (ENHANCEMENT): "Selection with single click" in Seamless
- Issue #97615 (ENHANCEMENT): parts4cad TENADO
- Issue #97697 (ENHANCEMENT): parts4cad ELITECAD
- Issue #97699 (ENHANCEMENT): parts4cad CADLINE
- Issue #97723 (ENHANCEMENT): parts4cad ELITECAD: Add attributes CFG
- Issue #98241 (ENHANCEMENT): parts4cad ELITECAD: Create portal and API-Key
- Issue #98245 (ENHANCEMENT): parts4cad CADLINE: Create portal and API-key
- Issue #98277 (ENHANCEMENT): Icon update for Seamless
- Issue #98279 (ENHANCEMENT): parts4cad (Tenado): Show splash screen at start
- Issue #98281 (ENHANCEMENT): parts4cad (Tenado): Exchange runtime icon and splash graphic
- Issue #95075 (PROBLEM): SolidEdge Seamless layout issue, and a crash
- Issue #95341 (PROBLEM): Optionally add link database toolbar to seamless
- Issue #95391 (PROBLEM): Crash when clicking show table and no project is loaded
- Issue #97467 (PROBLEM): Remove preferred rows button from Linkdb toolbar in seamless
- Issue #97521 (PROBLEM): Render mode not selectable in combination views in seamless
- Issue #97611 (PROBLEM): parts4cad (Tenado): Crash when DIN parts are in the search results
- Issue #98275 (PROBLEM): parts4cad (Tenado): Speedup scrolling on catalog level
- Issue #98685 (PROBLEM): LinkDB Toolbar - edit/delete dataset dialog not working properly
- Issue #99013 (PROBLEM): Make part selection options available in seamless
Component CAD / Allplan / Common
Component CAD / ARCHICAD / GDL
- Issue #94397 (ENHANCEMENT): ArchiCAD 21 online interface / plugin
- Issue #96623 (ENHANCEMENT): make ARCHICAD ready for parts4cad
- Issue #97485 (ENHANCEMENT): fix placement orientation (door is outside of the wall instead of "in the wall")
- Issue #97575 (ENHANCEMENT): make objects "catch-able" (magnet-mouseover) in Archicad
- Issue #96231 (PROBLEM): ArchiCad: Author, Comment and Keywords fields will not be set on direct export to ArchiCad
- Issue #96393 (PROBLEM): Enable Profile length Parameter by default
Component CAD / Autocad 2d / Interface
Component CAD / Catia V5 / Interface
Component CAD / IFC-CAD / Format
Component CAD / Inventor / Interface
- Issue #79027 (ENHANCEMENT): Default material is not set at assemblies
- Issue #97023 (ENHANCEMENT): Exporting colors to Inventor incorrectly
- Issue #97979 (ENHANCEMENT): Inventor: Add support for loading PS3 files using OpenDocument()
- Issue #95031 (PROBLEM): Part in pattern, replaced with an assembly, error in Inventor 2015
- Issue #97229 (PROBLEM): Inventor: Additional restriction for parameter for profile length
- Issue #97803 (PROBLEM): Inventor crash when replacing in component arrangement
- Issue #99025 (PROBLEM): Inventor: Crash on export to STL of a family instance when all features are suppressed
Component CAD / NX / Interface
- Issue #29496 (ENHANCEMENT): Implement support for Min-Max constraints (if available)
- Issue #50003 (ENHANCEMENT): Improve simple placement dialog
- Issue #51643 (ENHANCEMENT): Refactor LOD creation routines
- Issue #88335 (ENHANCEMENT): MCD: Sensors and Transport Surfaces
- Issue #93695 (ENHANCEMENT): NX Interface - dialog improvement for exporting part 2 times in a row
- Issue #97573 (ENHANCEMENT): Limit User Expression creation to specific Dimension variables
- Issue #97685 (ENHANCEMENT): Add support for slashes/backslashes in Teamcenter ItemIDs
- Issue #98229 (ENHANCEMENT): Update NX code for PARTserver and PLMSYNCRO
- Issue #99053 (ENHANCEMENT): NX Teamcenter: set project name when creating parts
- Issue #94189 (PROBLEM): Replace all instances in the root assembly missing option to replace only in this assembly
- Issue #94667 (PROBLEM): Need to check if file name of model opened in NX is exactly the same as on disk
- Issue #96423 (PROBLEM): NX 12 Interface is missing in sales_offlinecd
- Issue #97053 (PROBLEM): Geosearch in CAD searches for whole assembly instead of selected part
- Issue #97227 (PROBLEM): Export of Assemblies to STL creates meshes for invisible objects
- Issue #97603 (PROBLEM): NX 12.0.1 Update breaks PSOL interface
- Issue #98003 (PROBLEM): empty positioning dialog in NX
- Issue #98063 (PROBLEM): No STL previews are created when the model's body is not visible in view
- Issue #98407 (PROBLEM): Simple placement dialog causes a crash when the PSOL placement dialog is deactivated
Component CAD / OSDM / Interface
Component CAD / Pro-E / Interface
- Issue #95157 (ENHANCEMENT): Problem with replacement and suppressed parts
- Issue #98287 (ENHANCEMENT): Extern Copy Geom model can not geosearch in Creo
- Issue #98887 (ENHANCEMENT): Creo Parametric 5.0 - interface isn't loaded
- Issue #92413 (PROBLEM): Dimension Values are incorrect please verify
- Issue #97063 (PROBLEM): Change Length Expression Processing
- Issue #98555 (PROBLEM): Add Creo Parametric 5.0 Interface
Component CAD / Revit / Interface
- Issue #94219 (ENHANCEMENT): Materials in Revit Families (RFA)
- Issue #95573 (ENHANCEMENT): Translation for (error-)messages
- Issue #95657 (ENHANCEMENT): please rework the warning message "verify the existence of *.rft"
- Issue #96357 (ENHANCEMENT): Update CFG File (classification)
- Issue #96713 (ENHANCEMENT): enable parametric extrusion based on classification variable (single var)
- Issue #97963 (ENHANCEMENT): translate RFA importer
- Issue #98739 (ENHANCEMENT): ifrevit.cfg Support "RVT 2016" template path
- Issue #98795 (ENHANCEMENT): ifrevit.cfg remove inverts for x/y axis for face-based models
- Issue #91799 (PROBLEM): Prototype Replace Attribute instead of replace geometry
- Issue #95683 (PROBLEM): Proof right colour output in PARTcommunity catalog like on revit files
- Issue #97061 (PROBLEM): Add Lookup-Table to determine ParameterType by inspection of Unit-String
- Issue #97065 (PROBLEM): Change Length Expression Processing
Component CAD / SolidEdge / Interface
- Issue #65429 (ENHANCEMENT): Solid Edge minimized, remains in background during export
- Issue #94039 (ENHANCEMENT): Update BSF thread mapping
- Issue #95383 (ENHANCEMENT): Improve window state handling in ifsolidedge
- Issue #96375 (ENHANCEMENT): SolidEdge - Native checkin of STEP dialog improvement
- Issue #59501 (PROBLEM): SE ST5 and lower will not work on PSOl V11 SP0/SP1 Release
- Issue #75989 (PROBLEM): Solid Edge ST7 - Place parametric part to empty asm error
- Issue #84631 (PROBLEM): V10SP10 - SolidEdge - Replacing pattern creates an error: ffffffff8003002
- Issue #93999 (PROBLEM): SolidEdge does not support multiple selection types
- Issue #94859 (PROBLEM): Blend feature - wrong blends in Creo 4.0
- Issue #96371 (PROBLEM): Error: Invoke DSP
- Issue #97045 (PROBLEM): Export of negative parts doesn't work
- Issue #97249 (PROBLEM): Solid Edge ST10 - export of negative parts doesn't work
Component CAD / Solidworks / Interface
- Issue #29393 (ENHANCEMENT): Make Solidworks menu icons background transparent
- Issue #93623 (ENHANCEMENT): Geosearch in SW with invalid selection
- Issue #96441 (ENHANCEMENT): SolidWorks - Document Manager Key outsource in Config
- Issue #97633 (ENHANCEMENT): German Dialog for failed Browser Bar (Seamless?)
- Issue #98895 (ENHANCEMENT): Redo angle mates
- Issue #65423 (PROBLEM): Solidworks freezes when minimized, export attempted
- Issue #95581 (PROBLEM): [REPORT-PART] Festo: 156104 ADVULQ-32-80-P-A---(0)
- Issue #96785 (PROBLEM): Add button "event handling" to SolidWorks Interface
- Issue #97507 (PROBLEM): Dimension Values are incorrect
- Issue #97631 (PROBLEM): Configuration LO is missing at ISO 8676
- Issue #97881 (PROBLEM): Crash when insert parts into assembly and then replacing
Component CAD / VDI3805 / Makro
- Issue #94373 (ENHANCEMENT): Analyzation VDI3805 File Sheet 2 Import possible
- Issue #94379 (ENHANCEMENT): Analyzation VDI3805 File Sheet 23 Import possible
- Issue #94375 (PROBLEM): Analyzation VDI3805 File Sheet 20 Import possible
- Issue #94377 (PROBLEM): Analyzation VDI3805 File Sheet 22 Import possible
Component CAD / Vectorworks / Interface
Component PDM / Agile / Interface
- Issue #95479 (ENHANCEMENT): Follow-up: CATIA/3D Experience
- Issue #94961 (PROBLEM): Dassault 3DExperience PDM Interface for CATIA
- Issue #94965 (PROBLEM): PDM/Common: Catch exception in init_ifPLM
- Issue #95249 (PROBLEM): PDM : load login service in vbb pdllhost
- Issue #95481 (PROBLEM): Follow-up: SW/3D Experience
- Issue #96159 (PROBLEM): Native checkout: _ATTR macro can't access erptable nor linktable fields
- Issue #96723 (PROBLEM): PDM : use _georep_altfmt to generate JT files instead of translator line in PDM modules
- Issue #97939 (PROBLEM): Bug in XVARSET-compare in PLMTABLE2
Component PDM / ALL / PDMPROXIES
- Issue #61373 (ENHANCEMENT): Test access for PDM Preview formats
- Issue #91935 (ENHANCEMENT): Tasks: Add relative date queries
- Issue #95519 (ENHANCEMENT): Fix for pdmproxynxteamcenterdownloadservicec.vbb
- Issue #95979 (ENHANCEMENT): PDM : PDMPROXIES : support alternative input in convertFile
- Issue #96281 (ENHANCEMENT): PDM : PDMPROXIES : only use discriminator to identify interface instance
- Issue #95055 (PROBLEM): PDM : PDMPROXIES : Enhance Teamcenter JT interface: get document structure from BOM / custom code (eval)
- Issue #95057 (PROBLEM): PDM : PDMPROXIES : Add JT support to all CAD specific Teamcenter interfaces
- Issue #95059 (PROBLEM): PDM : PDMPROXIES : Add JT support to all CAD specific SAP-ECTR interfaces
- Issue #95285 (PROBLEM): PDM : PDMPROXIES : split query into two steps: (1) get object ids (and api objects); (2) get full data
- Issue #95441 (PROBLEM): PLMsync/FSO: If SearchBasePath contains a huge set of files, the query will run out of memory
- Issue #95721 (PROBLEM): PDM : PDMPROXIES : check why creation date on location information objects returns invalid timestamps
- Issue #95745 (PROBLEM): Inventor (FSOPdm): When converting a family part, instance files are not closed
- Issue #95981 (PROBLEM): Conversion: Remove merge mode
- Issue #97343 (PROBLEM): PDM : PDMPROXIES : each module needs it's own ZTR
- Issue #97985 (PROBLEM): FSOpdm: Make query full page-able and add basic multi-threading
Component PDM / CIMDATABASE / COMMON
Component PDM / SAP / Interface
Component PDM / Teamcenter / Catia
Component PDM / Teamcenter / Interface
Component PDM / Windchill / Interface
- Issue #95349 (ENHANCEMENT): Update CFG for usage in PARTadmin
- Issue #95393 (ENHANCEMENT): moveobjects: allow move object to the library ROOT with API
- Issue #97623 (ENHANCEMENT): Add support for WWGM 11.1
- Issue #97905 (ENHANCEMENT): PDM : Windchill : add support for creating content link from WTPart to EPMDocument (needed for Multicad)
- Issue #97973 (ENHANCEMENT): Show the return Message from Jsp file in PARTsolutions message box.
- Issue #98103 (PROBLEM): WWGM/CATIA: Improve interface