PARTsolutionsで利用可能な標準規格部品

CADENASのPARTsolutionsを導入すると、JISをはじめとしてISO、DINなど主要各国の標準規格部品のエンジニアリングデータへアクセスすることができます。

利用可能な標準規格一覧:

ISO 6162-1 FCSSplit flange
ISO 6162-1 FHFlange tube without slot, form FH
ISO 6162-1 FHGFlange tube with slot, form FHG
ISO 6162-1 FHGOFlange tube with slot and O-ring, form FHGO
ISO 6162-1 FPSFlange connectors with split flange clamps, form FPS
ISO 6162-1 FPFlange connectors with one-piece flange clamps, form FP
ISO 6162-1 OO-ring
ISO 6162-2 FCSSplit flange, form FCS
ISO 6162-2 FCOne-piece flange, form FC
ISO 6162-2 FHFlange tubes without slot, form FH
ISO 6162-2 FHGFlange tube with slot, form FHG
ISO 6162-2 FHGOFlange tube with slot and O-ring, form FHGO
ISO 6162-2 OO-ring
ISO 6162-2 FPFlange connectors with one-piece flange clamps, form FP
ISO 6162-1 FPSFlange connectors with split flange clamps, form FPS
ISO 7005-1 PN 2.5Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 6Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 10Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 16Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 20Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 25Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 40Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 50Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 110Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 150Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 260Metallic flanges - Part 1: Steel flanges
ISO 7005-1 PN 420Metallic flanges - Part 1: Steel flanges
ISO 3183PSL-Pipes
ISO 2938Hollow steel bars for machining
ISO 8535-1Steel tubes for high-preassure fuel injection pipes
ISO 7638-1 ParksteckdoseElectrical connectors for braking system, park power socket
ISO 7638-1 SteckdoseElectrical connectors for braking system, power socket
ISO 7638-1 SteckerElectrical connectors for braking systems, connectors
ISO 10243Compression springs with rectangular section
ISO 18286Hot-rolled stainless steel plates
ISO 9445 BLContinuously rolled sheet metal from rustproof steel
ISO 9445 KBContinuously rolled cold rolled strip (volume in widths smaller than 600mm) from rustproof steel
ISO 9445 KBBContinuously rolled cold broadband (volume in roles more largely than 600mm) from rustproof steel
ISO 9445 KBSContinuously rolled cold rolled strip in staffs from rustproof steel
ISO 4783-2Webbed gauze
ISO 4783-3 AOn both sides curled wire mesh
ISO 4783-3 BUniaxial between curled wire mesh
ISO 4783-3 COn both side between curled wire mesh
ISO 4783-3 DOn both sides before cranked wire mesh
ISO 4783-3 EOn both sides before cranked wire mesh, smooth-sided
ISO 4783-3 FPress welded wire mesh
ISO 14632Plates from PE
ISO 15527Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD)
ISO 1127Stainless steel tubes
ISO 6020-1Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MF1Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MF2Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MF3Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MF4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MP3Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MP4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MP5Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MP6Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MS2Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6020-1 MT4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series
ISO 6022Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MF3Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MF4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MP3Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MP4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MP5Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MP6Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6022 MT4Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 8132 AP2Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AP2 - Clevis with female threads
ISO 8132 AF3Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AF3 - Flange head, round
ISO 8132 AB4Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AB4 - Fork swivel bearing block, just
ISO 8132 AB3Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AB4 - Fork swivel bearing block, angularly
ISO 8132 AT4Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AT4 - Bearing block for trunnion execution
ISO 8132 AA8Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AA8 - Pin for clevis or rod eye (splint pin or snap ring design)
ISO 8132 AP6Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AP6 - Joint head with female threads
ISO 8132 AP4Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AP4 - Swivel head with female threads
ISO 1002 Tabelle 1Single row radial deep groove ball bearings, seal or deck washer, diameter row 0
ISO 1002 Tabelle 2Single row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 3Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9
ISO 1002 Tabelle 4Double row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 5Double row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 6Single row barrel roller bearing, seal or deck washer, diameter row 3
ISO 1002 Tabelle 11Single row radial deep groove ball bearing with seal or deck washer
ISO 1002 Tabelle 12Single row radial deep groove ball bearing with seal or deck washer
ISO 1002 Tabelle 13Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer
ISO 1002 Tabelle 14Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer
ISO 1002 Tabelle 15Double row angular contact radial ball bearing with seal washer
ISO 1002 Tabelle 16Double row self aligning roller bearings with seal or deck washer
ISO 1002 Tabelle 17Single row barrel roller bearings with deck washer
ISO 1002 Tabelle 18Double row barrel roller bearing with deck washer
ISO 1002 Tabelle 19Needle roller bearings with deck washer
ISO 1002 Tabelle 20Needle roller bearing, support rolls, single row, with deck washer
ISO 1002 Tabelle 21Needle roller bearing, support rolls, double row, with deck washer
ISO 1002 Tabelle 1Single row radial deep groove ball bearings, seal or deck washer, diameter row 0
ISO 1002 Tabelle 2Single row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 3Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9
ISO 1002 Tabelle 4Double row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 5Double row radial deep groove ball bearings, seal or deck washer, diameter row 2
ISO 1002 Tabelle 6Single row barrel roller bearing, seal or deck washer, diameter row 3
ISO 1002 Tabelle 11Single row radial deep groove ball bearing with seal or deck washer
ISO 1002 Tabelle 12Single row radial deep groove ball bearing with seal or deck washer
ISO 1002 Tabelle 13Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer
ISO 1002 Tabelle 14Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer
ISO 1002 Tabelle 15Double row angular contact radial ball bearing with seal washer
ISO 1002 Tabelle 16Double row self aligning roller bearings with seal or deck washer
ISO 1002 Tabelle 17Single row barrel roller bearings with deck washer
ISO 1002 Tabelle 18Double row barrel roller bearing with deck washer
ISO 1002 Tabelle 19Needle roller bearings with deck washer
ISO 1002 Tabelle 20Needle roller bearing, support rolls, single row, with deck washer
ISO 1002 Tabelle 21Needle roller bearing, support rolls, double row, with deck washer
ISO 355 Reihe 2Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 3Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 4Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 5Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 7Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 2Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 3Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 4Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 5Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 355 Reihe 7Tapered Roller Bearings, Boundary Dimensions and Series Designations
ISO 12240-1 CSpherical plain radial bearings, form C
ISO 12240-1 ESpherical plain radial bearings, form E
ISO 12240-1 GSpherical plain radial bearings, form G
ISO 12240-1 HSpherical plain radial bearings, form H
ISO 12240-1 KSpherical plain radial bearings, form K
ISO 12240-1 WSpherical plain radial bearings, form W
ISO 12240-2Spherical plain bearings - Part 2: Angular cantact radial spherical plain
ISO 12240-3Spherical plain bearing - Part 3: Thrust spherical plain bearings
ISO 12240-4 FJoint heads with inner thread form F
ISO 12240-4 MJoint heads with outer thread, form M
ISO 12240-4 SJoint heads with welding end, form S
ISO 4379 CPlain bearing - Copper alloy bushes, form C
ISO 4379 FPlain bearings - Copper alloy bushes, form F
ISO 2982-1 ARolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type A
ISO 2982-1 BRolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type B
ISO 2982-1 CRolling bearings - Accessories - Part 1: Tapered sleeves, withdrawal sleeves with taper 1:12 and 1:30 type C
ISO 2982-2Rolling bearings - Accessories - Part 2: Locknuts and locking devices, locking clips
ISO 2982-2Rolling bearings - Accessories - Part 2: Locknuts and locking devices
ISO 2982-2Rolling bearings - Accessories - Part 2: Locknuts and locking devices, bent tab lockwashers
ISO 2982-2Rolling bearings - Accessories - Part 2: Locknuts and locking devices, straight tab lockwashers
ISO 10511Prevailing torque type hexagon, thin nuts, (with non-metallic insert)
ISO 7040Prevailing torque type hexagon nuts, (with non-metallic insert), style1
ISO 7041Prevailing torque type hexagon nuts (with non-metalic insert), style 2
ISO 7042Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12
ISO 10512Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch
ISO 10513Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12
ISO 7719Prevailing torque type (all-metal hexagon nuts), type 1 – property classes 5, 8 and 10
ISO 4032Hexagon nuts, style 1 - Product grades A and B
ISO 4034Hexagon nuts - Product grades C
ISO 4033Hexagon nuts, style 2 - Product grades A and B
ISO 4035Hexagon thin nuts (chamfered) - Product grades A and B
ISO 4036Hexagon thin nuts (unchamfered) - Product grade B
ISO 8673Hexagon nuts, type 1, with metric fine pitch thread
ISO 8674Hexagon nuts, type 2, with metric fine pitch thread
ISO 8675Hexagon thin nuts with metric fine pitch thread, Product grades A and B
ISO 10663Hexagon nuts with flange, style 2, fine pitch thread
ISO 21670Hexagon weld nuts with flange
ISO 4161Hexagon nuts with flange - Coarse thread
ISO 5599-1ISO 5599-1: Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector"
ISO 8434-1 WDNP-AWeld nipples, form WDNP-A
ISO 8434-1 WDNP-BWeld nipples, form WDNP-B
ISO 8434-1 RingO-rings
ISO 8434-1 WDRDNPReducing welding nipples, form WDRDNP
ISO 8434-1 SWOSDS-E_MetrischStraight studs with elastomer seal with screw tap according to ISO 6149-2 or ISO 6149-3, form SWOSDS-E
ISO 8434-1 SWOSDS-EStraight studs with elastomer seal screw tap with ISO 1179-5 or ISO 9974-2, form SWOSDS-E
ISO 8434-1 SWOSDS-F_MetrischStraight studs with O-ring with screw tap according to ISO 6149-2 or ISO 6149-3, form SWOSDS-F
ISO 8434-1 SWOSDS-FStraight studs with O-ring screw tap with ISO 1179-5 or ISO 9974-2, form SWOSDS-F
ISO 8434-1 SWOSDS-B_MetrischStraight studs with metallic seal with screw tap according to ISO 6149-2 or ISO 6149-3, form SWOSDS-B
ISO 8434-1 SWOSDS-BStraight studs with metallic seal screw tap with ISO 1179-5 or ISO 9974-2, form SWOSDS-B
ISO 8434-1 RDSWJust directionally adjustable reducers, form RDSW
ISO 8434-1 RDSWCJust directionally adjustable reducers, form RDSWC
ISO 8434-1 PLPlugs with O-ring, form PL
ISO 8434-1 WDSAS-in socket, straight weld trims, form WDS
ISO 8434-1 WDSCAS Fittings, straight weld trims, form WDSC
ISO 8434-1 WDBHSESV-in socket, welded bulkheads, form WDBHS
ISO 8434-1 WDBHSCESV-in socket, welded bulkheads, form WDBHSC
ISO 8434-1 SDS-FGE-unions, screwed plugs for screw-in holes according to ISO 6149-1, Form SDS-F
ISO 8434-1 SDSC-FGE-connections, screwed connections for screw-in holes according to ISO 6149-1, form SDSC-F
ISO 8434-1 SDS-EGE-unions, screw-in unions for screw plug hole with cylinder thread
ISO 8434-1 SDSC-EGE-connections, pipe connections for screw plug hole with cylinder thread
ISO 8434-1 SDSC-BGE-connections, screwed connections for screw-in holes with cylindric thread and metal sealing edge, form SDSC-B
ISO 8434-1 SDS-BGE-unions, screwed union for screw-in holes with cylindric thread and metal sealing edge, Form SDS-B
ISO 8434-1 SG-unions, straight pipe unions, form S
ISO 8434-1 SCG-connections, straight connection, form SC
ISO 8434-1 KK-unions, cross union fittings, Form K
ISO 8434-1 KCK-unions, cross union fittings, Form KC
ISO 8434-1 CRCutting rings, Form CR
ISO 8434-1 BHSStraight bulkheads, form BHS
ISO 8434-1 BHSCSV-in fittings, straight bulkheads, form BHSC
ISO 8434-1 SWOBTT-pieces / outlet with O-ring, form SWOBT
ISO 8434-1 SWOBTCT-pieces / outlet with O-ring, form SWOBTC
ISO 8434-1 SWORTT-pieces / continuity with O-ring, form SWORT
ISO 8434-1 SWORTCT-pieces / continuity with O-ring, form SWORTC
ISO 8434-1 TT-unions, pipe union, form T
ISO 8434-1 TCT-connection, direction adjustable/outlet, form TC
ISO 8434-1 LNCounternuts, form LN
ISO 8434-1 NCap nuts, form N
ISO 8434-1 EW-unions, pipe union elbow 90°, form E
ISO 8434-1 ECW-connection, connection elbow 90°, form EC
ISO 8434-1 BHEWSV-unions, Elbow bulkheads, form BHE
ISO 8434-1 BHECWSV fittings, angle bulkheads, form BHEC
ISO 8434-1 SWOEConnecting sockets, directionally angle connectors with O-ring (SWOE)
ISO 8434-1 SWOECConnecting sockets, directionally angle connectors with O-ring (SWOEC)
ISO 8434-4 SWSDS-OREGE-unions, Screwed unions width O-Ring, form SWSDS, type OR
ISO 8434-4 SWSDS-EDEGE-unions, Screwed unions width elastomer seal, form SWSDS, type E
ISO 8434-4 RingO-rings
ISO 8434-4 WDRERED-NippIes, Welding nipples-reducing nipples, form WDRE
ISO 8434-4 RESWSRED-unions, Reducing unions, straight adjustable, form RESWS
ISO 8434-4 RESWSCRED-connections, Reducing connections, straight adjustable, form RESWSC
ISO 8434-4 NPWelding nipples width O-RING
ISO 8434-4 SWBTET-unions, direction adjustable outflow, form SWBT
ISO 8434-4 SWBTCET-connenctions, direction adjustable outflow, Form SWBTC
ISO 8434-4 SWRTEL-unions, direction adjustable pass, Form SWRT
ISO 8434-4 SWRTCEL-connenctions, direction adjustable pass, Form SWRTC
ISO 8434-4 SWEEW-unions, elbow unions direction adjustable, form SWE
ISO 8434-4 SWECEW-connenctions, Elbow unions direction adjustable, form SWEC
ISO 8434-3 BRSL-ABraze sleeves, form BRSL-A
ISO 8434-3 BRSL-BBraze sleeves, form BRSL-B
ISO 8434-3 BRRDSL-ABraze-on reducing sleeves, form BRRDSL-A
ISO 8434-3 BRRDSL-BBraze-on reducing sleeves, form BRRDSL-B
ISO 8434-3 BRSBraze-on straight connectors, form BRS
ISO 8434-3 NAStandard tube nuts, form NA
ISO 8434-3 NBHigh-strength tube nuts, form NB
ISO 8434-3 WDNPWeld-on nipples, form WDNP
ISO 8434-3 BHSStraight bulkheads, form BHS
ISO 8434-3 BHE90° bulkhead elbows, form BHE
ISO 8434-3 BHRTBulkhead run tees, form BHRT
ISO 8434-3 BHBTBulkhead branch tees, form BHBT
ISO 8434-3 BHE4545° bulkhead elbows, form BHE45
ISO 8434-3 BHLNBulkhead locknuts, form BHLN
ISO 8434-3 SWESwivel elbows, form SWE
ISO 8434-3 SWBTSwivel branch tees, form SWBT
ISO 8434-3 SWRTSwivel run tees, form SWRT
ISO 8434-3 SStraight union connectors, form S
ISO 8434-3 E90° elbow union connectors, form E
ISO 8434-3 TTee union connectors, form T
ISO 8434-3 KCross union connectors, form K
ISO 8434-3 SDSStraight stud connectors, form SDS
ISO 8434-3 SDE90° adjustable stud elbows, form SDE
ISO 8434-3 SDE4545° adjustable stud elbows, form SDE45
ISO 8434-3 SDBTAdjustable stud branch tees, form SDBT
ISO 8434-3 SDRTAdjustable stud run tees, form SDRT
ISO 8434-3 SDKAdjustable stud crosses, form SDK
ISO 8434-3 SDELLong drop elbow stud connectors, form SDEL
ISO 8434-3 SDSLLong stud connectors, form SDSL
ISO 8434-3 SDSWESwivel 90° adjustable stud elbows, form SDSWE
ISO 8434-3 SDSWSStud straight swivels, form SDSWS
ISO 8434-3 RDAReducers with nut, form RDA
ISO 8434-3 RDBReducers without nut, form RDB
ISO 8434-3 PLPlugs, form PL
ISO 8434-6 BRNP-ABraze-on nipples, form BRNP, with O-ring
ISO 8434-6 BRNP-BBraze-on nipples, form BRNP, without O-ring
ISO 8434-6 WDNP-1-AWeld-on nipples, form WDNP, type 1, with O-ring
ISO 8434-6 WDNP-1-BWeld-on nipples, form WDNP, type 1, without O-ring
ISO 8434-6 WDNP-2-AWeld-on nipples, form WDNP, type 2, with O-ring
ISO 8434-6 WDNP-2-BWeld-on nipples, form WDNP, type 2, without O-ring
ISO 8434-6 NLoose style nuts for weld-on nipples, form N
ISO 8434-6 LNLocknuts, form LN
ISO 8434-6 BRSBraze-on straight connectors, form BRS
ISO 8434-6 SStraight connectors, form S
ISO 8434-6 E90° elbow connectors, form E
ISO 8434-6 E4545° elbow connectors, form E45
ISO 8434-6 TMale tee connectors, form T
ISO 8434-6 SWS-AStraight swivel connectors, form SWS, with O-ring
ISO 8434-6 SWS-BStraight swivel connectors, form SWS, without O-ring
ISO 8434-6 SWE-A90° swivel elbow connectors, form SWE, with O-ring
ISO 8434-6 SWE-B90° swivel elbow connectors, form SWE, without O-ring
ISO 8434-6 SWE45-A45° swivel elbow connectors, form SWE45, with O-ring
ISO 8434-6 SWE45-B45° swivel elbow connectors, form SWE45, without O-ring
ISO 8434-6 SWBT-ASwivel branch tee connectors, form SWBT, with O-ring
ISO 8434-6 SWBT-BSwivel branch tee connectors, form SWBT, without O-ring
ISO 8434-6 SWRT-ASwivel run tee connectors, form SWRT, with O-ring
ISO 8434-6 SWRT-BSwivel run tee connectors, form SWRT, without O-ring
ISO 8434-6 SWSDS-AStraight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, with O-ring
ISO 8434-6 SWSDB-BStraight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, without O-ring
ISO 8434-6 SWSDE-A90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, with O-ring
ISO 8434-6 SWSDE-B90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, without O-ring
ISO 8434-6 SWSDE45-A45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, with O-ring
ISO 8434-6 SWSDE45-B45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, without O-ring
ISO 8434-6 SWSDS-E-AStraight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, with O-ring
ISO 8434-6 SWSDS-E-BStraight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, without O-ring
ISO 8434-6 SWSDS-G-AStraight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, with O-ring
ISO 8434-6 SWSDS-G-BStraight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, without O-ring
ISO 8434-6 SWSDE-H-A90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, with O-ring
ISO 8434-6 SWSDE-H-B90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, without O-ring
ISO 8434-6 SWSDE45-H-A45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, with O-ring
ISO 8434-6 SWSDE45-H-B45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, without O-ring
ISO 8434-6 SDSStraight stud connectors with ISO 6149-3 stud end, form SDS
ISO 8434-6 SDS-EStraight stud connectors with ISO 1179-2 type E stud end (L series), form SDS
ISO 8434-6 SDS-GStraight stud connectors with ISO 1179-3 type G stud end, form SDS
ISO 8434-6 SDE90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE
ISO 8434-6 SDE4545° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE45
ISO 8434-6 SDE-H90° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE
ISO 8434-6 SDE45-H45° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE45
ISO 8434-6 BHSStraight bulkhead connectors, form BHS
ISO 8434-6 BHE90° bulkhead elbow connectors, form BHE
ISO 8434-6 RingO-rings
ISO 12151-1 SMale hose fittings, straight, form S
ISO 12151-1 SWSAFemale swivel hose fittings, straight, form SWSA
ISO 12151-1 SWSBFemale swivel hose fittings, straight, form SWSB
ISO 12151-1 SWE45SFemale swivel hose fittings, 45° elbow, form SWE45S
ISO 12151-1 SWE45MFemale swivel hose fittings, 45° elbow, form SWE45M
ISO 12151-1 SWESFemale swivel hose fittings, 90° elbow, form SWES
ISO 12151-1 SWEMFemale swivel hose fittings, 90° elbow, form SWEM
ISO 12151-1 SWELFemale swivel hose fittings, 90° elbow, form SWEL
ISO 12151-2 SWSHose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight fitting with swivel nut, form SWS
ISO 12151-2 SWEHose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 90°-elbow fitting with swivel nut, form SWE
ISO 12151-2 SWE45Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 45°-elbow fitting with swivel nut, form SWE45
ISO 12151-2 SHose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight threaded stud, form S
ISO 12151-3 SHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, straight hose fitting, form S
ISO 12151-3 E45SHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, short, form E45S
ISO 12151-3 E45MHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, medium, form E45M
ISO 12151-3 ESHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, short, form ES
ISO 12151-3 EMHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, medium, form EM
ISO 12151-3 E22MHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 22.5°-flange curve fitting, medium, form E22M
ISO 12151-3 E30SHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, short, form E30S
ISO 12151-3 E30MHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, medium, form E30M
ISO 12151-3 E60SHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, short, form E60S
ISO 12151-3 E60MHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, medium, form E60M
ISO 12151-3 E67SHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, short, form E67S
ISO 12151-3 E67MHose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, medium, form E67M
ISO 1479 CHexagon head tapping screws, form C
ISO 1479 FHexagon head tapping screws, form F
ISO 1479 RHexagon head tapping screws, form R
ISO 1481 CSlotted pan head tapping screws, form C
ISO 1481 FSlotted pan head tapping screws, form F
ISO 1482 CSlotted countersunk flat head tapping screws, form C
ISO 1482 FSlotted countersunk flat head tapping screws, form F
ISO 1483 CSlotted raised countersunk oval head tapping screw, form C
ISO 1483 FSlotted raised countersunk oval head tapping screws, form F
ISO 7049 C-HCross recessed pan head tapping screws
ISO 7049 C-ZCross recessed pan head tapping screws
ISO 7049 F-HCross recessed pan head tapping screws
ISO 7049 F-ZCross recessed pan head tapping screws
ISO 7049 R-HCross recessed pan head tapping screws
ISO 7049 R-ZCross recessed pan head tapping screws
ISO 7050 C-HCross recessed countersunk flat head tapping screws
ISO 7050 C-ZCross recessed countersunk flat head tapping screws
ISO 7050 F-HCross recessed countersunk flat head tapping screws
ISO 7050 F-ZCross recessed countersunk flat head tapping screws
ISO 7050 R-HCross recessed countersunk flat head tapping screws
ISO 7050 R-ZCross recessed countersunk flat head tapping screws
ISO 7051 C-HCross recessed raised countersunk oval head tapping screws
ISO 7051 C-ZCross recessed raised countersunk oval head tapping screws
ISO 7051 F-HCross recessed raised countersunk oval head tapping screws
ISO 7051 F-ZCross recessed raised countersunk oval head tapping screws
ISO 7051 R-HCross recessed raised countersunk oval head tapping screws
ISO 7051 R-ZCross recessed raised countersunk oval head tapping screws
ISO 15480Hexagon washer head drilling screws with tapping screw thread
ISO 15481 HCross recessed pan head drilling screws, form H
ISO 15481 ZCross recessed pan head drilling screws, form Z
ISO 15482 HCross recessed countersunk head drilling screws with tapping, form H
ISO 15482 ZCross recessed countersunk head drilling screws with tapping, form Z
ISO 15483 HCross recessed raised countersunk head drilling screws with tapping screw thread, form H
ISO 15483 ZCross recessed raised countersunk head drilling screws with tapping screw thread, form Z
ISO 7053 CHexagon washer head tapping screws with collar, form C
ISO 7053 FHexagon washer head tapping screws with collar, form F
ISO 7053 RHexagon washer head tapping screws with collar, form R
ISO 4766Slotted set screws with flat point
ISO 7434Slottet set screws with cone point
ISO 7435Slotted set screws with long dog point
ISO 7436Slotted set screws slot and ring-edge
ISO 2342Slotted headless screws with shank
ISO 4026Hexagon socket set screws with flat point
ISO 4027Hexagon socket set screws with cone point
ISO 4028Hexagon socket set screws with dog point
ISO 4029Hexagon socket set screws with cup point
ISO 10644 S1Screws and washer assemblies with plain washers. Hexagon sheet metal screws with thread to head
ISO 10644 S2Screws and washer assemblies with plain washers. Head cap bolts with shank
ISO 10644 S3Screws and washer assemblies with plain washers
ISO 10644 S4Screws and washer assemblies with plain washers. Head cap bolts with inside hexagonal
ISO 10644 S5Screws and washer assemblies with plain washers
ISO 10644 S6Screws and washer assemblies with plain washers. Head cap bolts with slot
ISO 10644 S10Screws and washer assemblies with plain washers
ISO 10644 S11Screws and washer assemblies with plain washers
ISO 10644 S12Screws and washer assemblies with plain washers
ISO 10644 S13Screws and washer assemblies with plain washers
ISO 4017Hexagon bolts with thread to the head
ISO 4014Hexagon head bolts with shank, product groups A and B
ISO 4018Hexagon head screws with thread until head
ISO 8676Hexagon bolts with thread to the head, metric fine thread
ISO 8765Hexagon head bolts with shank, metric fine thread
ISO 15071Hexagon bolts with flange, small series
ISO 15072Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A
ISO 4015Hexagon head bolts, reduced shank
ISO 4016Hexagon head bolts with shank
ISO 4162Hexagon bolts with flange, small series
ISO 7046-1 HCountersunk flat head screws (common head style) with type H cross recess - Product grade A – Part 1: Steel screws of property class 4.8
ISO 2009Slotted countersunk flat head screws, product grade A
ISO 2010Slotted raised countersunk head screws (common head style) – product grade A
ISO 7046-1 ZCountersunk flat head screws (common head style) with type Z cross recess - Product grade A – Part 1: Steel screws of property class 4.8
ISO 7046-2 H1Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1
ISO 7046-2 H2Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2
ISO 7046-2 Z1Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1
ISO 7046-2 Z2Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2
ISO 7047 HSlotted raised countersunk raised head screws (common head style) with type H cross recess, product grade A
ISO 7047 ZSlotted raised countersunk raised head screws (common head style) with type Z cross recess, product grade A
ISO 10642Hexagon socket countersunk head screws
ISO 3266Eye bolts
ISO 7379Hexagon socket head shoulder screw
ISO 7380-1Button head screws - Part 1: Hexagon socket button head screws
ISO 7380-2Button head screws - Part 2: Hexagon socket button head screws with collar
ISO 8678Cup head square neck bolts with small head and short neck
ISO 14579Hexalobular socket head cap screws
ISO 14580Hexalobular socket cheese head screws, low head
ISO 14581Counter sunk screws with torx
ISO 14583Hexalobular socket pan head screws
ISO 14584Hexalobular socket pan head screws
ISO 14585 CHexalobular socket pan head tapping screws
ISO 14585 FHexalobular socket pan head tapping screws
ISO 14585 RHexalobular socket pan head tapping screws
ISO 14586 CHexalobular socket countersunk head tapping screws
ISO 14586 FHexalobular socket countersunk head tapping screws
ISO 14586 RHexalobular socket countersunk head tapping screws
ISO 14587 CHexalobular socket raised countersunk (oval) head tapping screws
ISO 14587 FHexalobular socket raised countersunk (oval) head tapping screws
ISO 14587 RHexalobular socket raised countersunk (oval) head tapping screws
ISO 4762Hexagon socket head cap screws
ISO 1207Slotted cheese head screws, product grade A
ISO 1580Slotted pan head screws, product grade A
ISO 7045 HPan head screws with cross recess, form H – product grade A
ISO 7045 ZPan head screws with cross recess, form Z – product grade A
ISO 12474Hexalobular socket head cap screws with fine pitch thread
ISO 21269Hexalobular socket head cap screws with fine pitch thread
ISO 7048 HCross recessed cheese head screws, form H
ISO 7048 ZCross recessed cheese head screws, form Z
ISO 10242-2 CPunch holder shanks, form C
ISO 9183-1 AWear plates for press dies, type A
ISO 8740Cylindrical grooved pins with chamfer
ISO 8745Grooved pins, half length taper grooved
ISO 8746 AGrooved pins with round head, form A
ISO 8746 BGrooved pins with round head, form B
ISO 8739Grooved pins, full-length parallel growed, with pilot
ISO 8741Grooved pins, half length reverse grooved
ISO 8742Grooved pins, full-length parallel growed, with pilot
ISO 8743Grooved pins - Half-length centre grooved
ISO 8744Grooved pins, full-length parallel growed, with pilot
ISO 8747 AGrooved pins with countersunk head, form A
ISO 8747 BGrooved pins with countersunk head, form B
ISO 15973Closed end blind rivets with break pull mandrel and protruding head AIA/St
ISO 15974Closed end blind rivets with break pull mandrel and countersunk head AIA/St
ISO 15975Closed end blind rivets with break pull mandrel and protruding head AI/AIA
ISO 15976Closed end blind rivets with break pull mandrel and protruding head St/St
ISO 15977Open end blind rivets with break pull mandrel and protruding head AIA/St
ISO 15978Open end blind rivets with break pull mandrel and countersunk head AIA/St
ISO 15979Open end blind rivets with break pull mandrel and protruding head St/St
ISO 15980Open end blind rivets with break pull mandrel and countersunk head St/St
ISO 15981Open end blind rivets with break pull mandrel and protruding head AIA/AIA
ISO 15982Open end blind rivets with break pull mandrel and countersunk head AIA/AIA
ISO 15983Open end blind rivets with break pull mandrel and protruding head A2/A2
ISO 15984Open end blind rivets with break pull mandrel and countersunk head A2/A2
ISO 16582Open end blind rivets with break pull mandrel and protruding head. Cu/St, Cu/Br or Cu/SSt
ISO 16583Open end blind rivets with break pull mandrel and countersunk head Cu/St or Cu/Br or Cu/SSt
ISO 16584Open end blind rivets with break pull mandrel and protruding head NiCu/St or NiCu/SSt
ISO 16585Closed end blind rivets with break pull mandrel and protruding head A2/SSt
ISO 2338Parallel pins from unhardened steel and stainless steel
ISO 8734Parallel pins of hardened steel and martensitic stainless steel
ISO 8735 AParallel pins with internal thread, hardened, form A
ISO 8735 BParallel pins with internal thread, hardened, form B
ISO 2339 ATaper pins, not hardened, form A
ISO 2339 BTaper pins, unhardened, form B
ISO 8733Parallel pins, with internal thread
ISO 8736 ATaper pins with inner thread, no hardened, form A
ISO 8736 BTaper pins with inner thread, unhardened, form B
ISO 8737Taper pins with threaded pin
ISO 8748Spring-type straight pins - Coiled, heavy duty
ISO 8750Spring-type straight pins - Coiled, standard duty
ISO 8752Clamping pins - slotted, heavy duty
ISO 13337Spring-type straight pins, slotted, light duty
ISO 8751Spring-type straight pins - Coiled, light duty
ISO 1234Split pins
ISO 2340 AClevis pins without head, form A
ISO 2340 BClevis pins without head, form B
ISO 2341 AClevis pins with head, form A
ISO 2341 BClevis pins with head, form B
ISO 3601-4 T1Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T1
ISO 3601-4 T2Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T2
ISO 3601-4 T3Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T3
ISO 3601-4 T4Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T4
ISO 3601-4 T5Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T5
ISO 6194-1 Typ 1Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased
ISO 6194-1 Typ 1SRotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased. Single lip with protection lip
ISO 6194-1 Typ 2Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case
ISO 6194-1 Typ 2SRotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case. Single lip with protection lip
ISO 6194-1 Typ 3Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 3. Semi-rubber-covered metal-cased
ISO 6194-1 Typ 3SRotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Semi-rubber-covered metal-cased. Single lip with protection lip
ISO 6194-1 Typ 4Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased
ISO 6194-1 Typ 4SRotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased. Single lip with protection lip
ISO 3912Woodruff keys and keyways
ISO 3547-1Rolled bushes
ISO 4247Press-fitt bushes - Headed type
ISO 4247Press-fitt bushes - Headless type
ISO 4247Locking screws
ISO 4247Press-fitt liners - Headed type
ISO 4247Press-fitt liners - Headless type
ISO 4247Renewable bushes - Fixed type with or without bore for stop pin
ISO 4247Renewable bushes - Slip type with or without bore for stop pin
ISO 4247Jig bushes and accessories for drilling purposes
ISO 4247Tenons
ISO 5468Rotary and rotary impact masonry drill bits with hardmetal tips
ISO 238 INCHExtension sockets for tools with Morse taper shanks
ISO 238Extension sockets for tools with Morse taper shanks
ISO 238 INCHReduction sleeves for tools with Morse taper shanks
ISO 238Reduction sleeves for tools with Morse taper shanks
ISO 10102Double-headed open-ended engineers' wrenches
ISO 2725-1 AHand-operated sockets, form A
ISO 2725-1 BHand-operated sockets, form B
ISO 2725-2Machine-operated sockets ("impact"), rings
ISO 2725-2Machine-operated sockets ("impact"), retaining pins
ISO 2725-2Machine-operated sockets ("impact")
ISO 2725-3Machine-operated sockets ("non-impact"), rings
ISO 2725-3Machine-operated sockets ("non-impact"), retaining pin
ISO 2725-3 GMachine-operated sockets ("non-impact"), form G
ISO 2725-3 JMachine-operated sockets ("non-impact"), form J
ISO 2936Hexagon socket screw key
ISO 4231Hand and machine-operated circular screwing dies for parallel pipe threads, G series
ISO 6751Knockout pin with cylindricity
ISO 6787 AAdjustable wrenches, open end, form A
ISO 6787 BAdjustable wrenches, open end, form B
ISO 7738 ACombination wrenches, form A
ISO 7738 BCombination wrenches, form B
ISO 10889-1Tool holders with parallel shank
ISO 10889-2 A1Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, right angular
ISO 10889-2 A2Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, round
ISO 10889-3 B1Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B1 right, short
ISO 10889-3 B2Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B2 left, short
ISO 10889-3 B3Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, right, short
ISO 10889-3 B4Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, left, short
ISO 10889-3 B5Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B5 right, long
ISO 10889-3 B6Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 left, long
ISO 10889-3 B7Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B7 overhead, right, long
ISO 10889-3 B8Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 overhead, left, long
ISO 10889-4 C1Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C1, right
ISO 10889-4 C2Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C2, left
ISO 10889-4 C3Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C3, overhead, right
ISO 10889-4 C4Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C4, overhead, left
ISO 10889-5 D1Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D1
ISO 10889-5 D2Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D2
ISO 10889-6 E1Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E1 for drilling tools with internal coolant feed
ISO 10889-6 E2Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E2 for turning tools with cylindrical
ISO 10889-8 Z1Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z1, clamping rings
ISO 10889-8 Z2Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z2, blanking plugs
ISO 10889-8 Z3Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z3, ball nozzles
ISO 228-1Screw clearance hole
ISO 273 fClearance hole for screws, fine
ISO 273 gClearance hole for screws, rough
ISO 273 mClearance hole for screws, medium
ISO 13918 FDStuds and ceramic ferrules for arc stud welding, form FD
ISO 13918 PFCeramic rings for stud bolts, form PF
ISO 13918 ITStuds with internal thread for arc stud welding, form IT
ISO 13918 PDStuds bolt for arc welding, form PD
ISO 13918 PTStuds for arc welding, form PT
ISO 13918 RDStuds with reduce shaft for arc welding, form RD
ISO 13918 RFCeramic rings for studs with reduced shank, form RF
ISO 13918 SD1Shear connectors for arc welding, form SD1
ISO 13918 SD2Shear connectors for arc welding, form SD2
ISO 13918 SD3Shear connectors for arc welding, form SD3
ISO 13918 PSStuds and ceramic ferrules for arc stud welding, form PS
ISO 13918 USStuds for arc stud welding, form US
ISO 13918 ISStuds with internal thread for arc stud welding, form IS
ISO 13918 UDStuds for arc stud welding, form UD
ISO 13918 IDStuds with internal thread for arc stud welding, form ID
ISO 13918 UFCeramic rings for pins and head bolts, form UF
ISO 13918 UTStuds for arc stud welding, form UT
ISO 8139Joint heads with inner thread
ISO 8140Clevis
ISO 487 SSteel roller chains, type S
ISO 487 CSteel roller chains, type C
ISO 487 C F1Steel roller chains, type C, F1 attachment plates
ISO 487 C F4Steel roller chains, type C, F4 attachment plates
ISO 487 S F4Steel roller chains, type S, F4 attachment plates
ISO 487 S K1Steel roller chains, type S, K1 attachment plates
ISO 487 C K1Steel roller chains, type C, K1 attachment plates
ISO 487 S M1Steel roller chains, type S, M1 attachment plates
ISO 487Chain wheels for steel roller chains type S and C
ISO 606Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
ISO 3601-1O-rings
ISO 3601-2O-rings - Housings
ISO 8738Washers for studs, finish coarse
ISO 7089Plain washers, normal series, product grade A
ISO 7092Plain washers, small series, product grade A
ISO 10669 LPlain washers for tapping screw and washer assemblies, form L
ISO 10669 NPlain washers for tapping screw and washer assemblies, form N
ISO 10673 LPlain washers for screw and washer assemblies, form L
ISO 10673 NPlain washers for screw and washer assemblies, form N
ISO 10673 SPlain washers for screw and washer assemblies, form S
ISO 7090Plain washers, chamfered, normal series, product grade A
ISO 7091Plain washers, normal series, product grade C
ISO 7093-1Plain washers, large series, product grade A
ISO 7093-2Plain washers, large series, product grade C
ISO 7094Plain washers, extra large series, product grade C
ISO 887Plain washers for metric bolts, screws and nuts for general purposes
ISO 7010 E001Safety marking, emergency exit (left), form E001
ISO 7010 E002Safety marking, emergency exit (right), form E002
ISO 7010 E003Safety marking, first aid, form E003
ISO 7010 E004Safety marking, emergency telephone, form E004
ISO 7010 E007Safety marking, collection, form E007
ISO 7010 E008Safety marking, emergency exit device, which can be reached by smashing a disk, form E008
ISO 7010 E009Safety marking, doctor, form E009
ISO 7010 E010Safety marking, automated external defibrillator (AED), form E010
ISO 7010 E011Safety marking, eyewash, form E011
ISO 7010 E012Safety marking, safety shower, form E012
ISO 7010 E013Safety marking, stretcher, form E013
ISO 7010 E014Safety marking, detection system for the presence and orientation of a child seat (s: COPD), form E014
ISO 7010 E015Safety marking, drinking water, form E015
ISO 7010 E016Safety marking, emergency exit with escape ladder, form E016
ISO 7010 E017Safety marking, emergency exit, form E017
ISO 7010 E018Safety marking, opening by turning it counterclockwise, form E018
ISO 7010 E019Safety marking, opening by turning clockwise, form E019
ISO 7010 E020Safety marking, emergency stop button, form E020
ISO 7010 E022Safety marking, door open by pressing on the left side, form E022
ISO 7010 E023Safety marking, door open by pressing on the right side, form E023
ISO 7010 E024Safety marking, provisional evacuation point, form E024
ISO 7010 E027Safety marking, medical emergency kits, form E027
ISO 7010 E028Safety marking, resuscitator, form E028
ISO 7010 E029Safety marking, emergency escape breathing devices, form E029
ISO 7010 E031Safety marking, general alarm on a ship, form E031
ISO 7010 E032Safety marking, collection on a ship, form E032
ISO 7010 E033Safety marking, sliding door opens to the right, form E033
ISO 7010 E034Safety marking, door opens to the left, form E034
ISO 7010 E035Safety marking, door open by pressing on the right side, form E035
ISO 7010 E036Safety marking, door opens to the left, form E036
ISO 7010 E037Safety marking, rescue boat, form E037
ISO 7010 E038Safety marking, liferaft, form E038
ISO 7010 E039Safety marking, deployable with david liferaft, form E039
ISO 7010 E040Safety marking, lifebuoy, form E040
ISO 7010 E041Safety marking, lifebelt with leash, form E041
ISO 7010 E042Safety marking, lifebuoy with light, form E042
ISO 7010 E043Safety marking, lifebelt with leash and light, form E043
ISO 7010 E044Safety marking, lifejacket, form E044
ISO 7010 E045Safety marking, lifejacket for children, form E045
ISO 7010 E046Safety marking, lifejacket for infants, form E046
ISO 7010 E047Safety marking, radar transponder for search and rescue, form E047
ISO 7010 E048Safety marking, signal rocket, form E048
ISO 7010 E049Safety marking, parachute signal rocket, form E049
ISO 7010 E050Safety marking, line-throwing device, form E050
ISO 7010 E051Safety marking, VHF device (send / receive), portable, form E051
ISO 7010 E052Safety marking, to radio beacon emergency position-indicating, form E052
ISO 7010 E053Safety marking, embarkation ladder, form E053
ISO 7010 E054Safety marking, open slide for marine evacuation, form E054
ISO 7010 E055Safety marking, closed slide for marine evacuation, form E055
ISO 7010 E056Safety marking, survival suit, form E056
ISO 7010 E057Safety marking, door opened by pulling on the left side, form E057
ISO 7010 E058Safety marking, door opened by pulling on the right side, form E058
ISO 7010 E059Safety marking, escape ladder, form E059
ISO 7010 E060Safety marking, emergency seat, form E060
ISO 7010 F001Safety marking, fire extinguishers, form F001
ISO 7010 F002Safety marking, fire hose, form F002
ISO 7010 F003Safety marking, fire escape, form F003
ISO 7010 F004Safety marking, means and equipment for fire fighting, form F004
ISO 7010 F005Safety marking, fire alarms, form F005
ISO 7010 F006Safety marking, fire hose, form F006
ISO 7010 F008Safety marking, fixed fire extinguishing agent battery, form F008
ISO 7010 F009Safety marking, wheeled fire extinguisher, form F009
ISO 7010 F010Safety marking, portable foam applicator unit, form F010
ISO 7010 F011Safety marking, pipe water mist, form F011
ISO 7010 F012Safety marking, fixed fire-extinguishing system, form F012
ISO 7010 F013Safety marking, fixed fire-extinguishing bottle, form F013
ISO 7010 F014Safety marking, triggering station for space protection, form F014
ISO 7010 F015Safety marking, fire monitor, form F015
ISO 7010 M001Safety marking, general mandatory sign, form M001
ISO 7010 M002Safety marking, observe instructions, form M002
ISO 7010 M003Safety marking, use hearing protection, form M003
ISO 7010 M004Safety marking, use eye protection, form M004
ISO 7010 M005Safety marking, ground before use, form M005
ISO 7010 M006Safety marking, unplug, form M006
ISO 7010 M007Safety marking, largely opaque eye protection, form M007
ISO 7010 M008Safety marking, foot protection use, form M008
ISO 7010 M009Safety marking, hand protection use, form M009
ISO 7010 M00XSafety marking, lift point, form M00X
ISO 7010 M010Safety marking, protective clothing use, form M010
ISO 7010 M011Safety marking, wash your hands, form M011
ISO 7010 M012Safety marking, handrail use, form M012
ISO 7010 M013Safety marking, use face shield, form M013
ISO 7010 M014Safety marking, use head protection, form M014
ISO 7010 M015Safety marking, safety vest use, form M015
ISO 7010 M016Safety marking, mask use, form M016
ISO 7010 M017Safety marking, respirator use, form M017
ISO 7010 M018Safety marking, safety harness use, form M018
ISO 7010 M019Safety marking, welding mask use, form M019
ISO 7010 M020Safety marking, use restraint system, form M020
ISO 7010 M021Safety marking, supply before maintenance or repairs, form M021
ISO 7010 M022Safety marking, skin protection agents use, form M022
ISO 7010 M023Safety marking, use transition, form M023
ISO 7010 M024Safety marking, pedestrian use, form M024
ISO 7010 M025Safety marking, protect infants by largely opaque eye shield, form M025
ISO 7010 M026Safety marking, protective apron use, form M026
ISO 7010 M027Safety marking, consider shutting off, form M027
ISO 7010 M028Safety marking, keep locked, form M028
ISO 7010 M029Safety marking, give audible signal, form M029
ISO 7010 M030Safety marking, using waste containers, form M030
ISO 7010 M031Safety marking, guard the table saw use, form M031
ISO 7010 M032Safety marking, antistatic footwear, form M032
ISO 7010 M033Safety marking, safety bar of the chair lift close, form M033
ISO 7010 M034Safety marking, open safety bar of the chair lift, form M034
ISO 7010 M035Safety marking, in case of a fall towing path immediately leave, form M035
ISO 7010 M036Safety marking, lift ski tips, form M036
ISO 7010 M037Safety marking, close holes and secure the settling process, form M037
ISO 7010 M038Safety marking, engine start when settling process, form M038
ISO 7010 M039Safety marking, lifeboat veer in mouse setting process, form M039
ISO 7010 M040Safety marking, liferaft veer in mouse setting process, form M040
ISO 7010 M041Safety marking, rescue boat veer in mouse setting process, form M041
ISO 7010 M042Safety marking, traps solve the settling process, form M042
ISO 7010 M043Safety marking, water spray system switch in mouse setting process, form M043
ISO 7010 M044Safety marking, air supply on when mouse setting process, form M044
ISO 7010 M045Safety marking, lifeboat lashings solve at mouse setting process, form M045
ISO 7010 M046Safety marking, secure gas cylinders, form M046
ISO 7010 M047Safety marking, self-contained respiratory protective, form M047
ISO 7010 M048Safety marking, gas detector use, form M048
ISO 7010 M049Safety marking, personal protective equipment for roller sports use, form M049
ISO 7010 P001Safety marking, general prohibition sign, form P001
ISO 7010 P002Safety marking, smoking, form P002
ISO 7010 P003Safety marking, no open flame; fire, open ignition source and smoking prohibited, form P003
ISO 7010 P004Safety marking, for pedestrians prohibitions, form P004
ISO 7010 P005Safety marking, no drinking, form P005
ISO 7010 P006Safety marking, material handling prohibitions, form P006
ISO 7010 P007Safety marking, no access for persons with pacemakers or implanted defibrillators, form P007
ISO 7010 P008Safety marking, carrying metal parts or watches prohibited, form P008
ISO 7010 P009Safety marking, prohibited upgrade, form P009
ISO 7010 P010Safety marking, prohibited touching, form P010
ISO 7010 P011Safety marking, prohibited extinguish with water, form P011
ISO 7010 P012Safety marking, no heavy burden, form P012
ISO 7010 P013Safety marking, active mobile phones prohibited, form P013
ISO 7010 P014Safety marking, no access for people with metal implants, form P014
ISO 7010 P015Safety marking, prohibited placing your hands, form P015
ISO 7010 P016Safety marking, prohibited splash with water, form P016
ISO 7010 P017Safety marking, pushing forbidden, form P017
ISO 7010 P018Safety marking, prohibited sitting, form P018
ISO 7010 P019Safety marking, prohibited upgrade, form P019
ISO 7010 P020Safety marking, lift in case of fire not use, form P020
ISO 7010 P021Safety marking, dogs are prohibited, form P021
ISO 7010 P022Safety marking, eating or drinking, form P022
ISO 7010 P023Safety marking, parking or storing prohibited, form P023
ISO 7010 P024Safety marking, entering the prohibited area, form P024
ISO 7010 P025Safety marking, using the incomplete skeleton prohibited, form P025
ISO 7010 P026Safety marking, prohibition, this device to use in the bath, shower or filled with water basin, form P026
ISO 7010 P027Safety marking, passenger transport prohibitions, form P027
ISO 7010 P028Safety marking, use of gloves prohibited, form P028
ISO 7010 P029Safety marking, photography forbidden, form P029
ISO 7010 P030Safety marking, knots of ropes prohibitions, form P030
ISO 7010 P031Safety marking, turn forbidden, form P031
ISO 7010 P032Safety marking, not permitted for face grinding, form P032
ISO 7010 P033Safety marking, not permitted for wet grinding, form P033
ISO 7010 P034Safety marking, not permitted for freehand and manually guided grinding, form P034
ISO 7010 P035Safety marking, metal studded footwear, form P035
ISO 7010 P036Safety marking, banned children, form P036
ISO 7010 P037Safety marking, forbidden to leave towing path, form P037
ISO 7010 P038Safety marking, rocking in the chair prohibited, form P038
ISO 7010 P039Safety marking, prohibited hot work, form P039
ISO 7010 W001Safety marking, warning signs general, form W001
ISO 7010 W002Safety marking, warning of explosive materials, form W002
ISO 7010 W003Safety marking, warning of radioactive substances or ionizing radiation, form W003
ISO 7010 W004Safety marking, warning of laser beam, form W004
ISO 7010 W005Safety marking, warning against non-ionizing radiation, form W005
ISO 7010 W006Safety marking, warning of a magnetic field, form W006
ISO 7010 W007Safety marking, warning of obstacles in the ground, form W007
ISO 7010 W008Safety marking, warning of danger of falling, form W008
ISO 7010 W009Safety marking, warning biohazard, form W009
ISO 7010 W010Safety marking, warning of low temperature / frost, form W010
ISO 7010 W011Safety marking, warning of danger of slipping, form W011
ISO 7010 W012Safety marking, warning of electrical voltage, form W012
ISO 7010 W013Safety marking, warning watchdog, form W013
ISO 7010 W014Safety marking, warning of industrial trucks, form W014
ISO 7010 W015Safety marking, warning of suspended load, form W015
ISO 7010 W016Safety marking, warning of toxic substances, form W016
ISO 7010 W017Safety marking, warning of hot surfaces, form W017
ISO 7010 W018Safety marking, warning of automatic start, form W018
ISO 7010 W019Safety marking, warning of entrapment, form W019
ISO 7010 W020Safety marking, warning of obstacles in the head area, form W020
ISO 7010 W021Safety marking, warning of flammable materials, form W021
ISO 7010 W022Safety marking, warning of a pointed object, form W022
ISO 7010 W023Safety marking, warning of corrosive materials, form W023
ISO 7010 W024Safety marking, warning of injury to hands, form W024
ISO 7010 W025Safety marking, warning opposing roles, form W025
ISO 7010 W026Safety marking, warning against the dangers of charging batteries, form W026
ISO 7010 W027Safety marking, warning of optical radiation, form W027
ISO 7010 W028Safety marking, warning of oxidizing substances, form W028
ISO 7010 W029Safety marking, warning of gas cylinders, form W029
ISO 7010 W030Safety marking, warning of crushing the hand of a press between the tools, form W030
ISO 7010 W031Safety marking, warning of barbed, form W031
ISO 7010 W032Safety marking, warning of high-speed piece in a press, form W032
ISO 7010 W033Safety marking, warning of barbed wire, form W033
ISO 7010 W034Safety marking, warning of taurus, form W034
ISO 7010 W035Safety marking, warning against falling objects, form W035
ISO 7010 W036Safety marking, warning of not penetratable, form W036
ISO 7010 W037Safety marking, warning of rolling over by remote-controlled machine, form W037
ISO 7010 W038Safety marking, warning of sudden onset of loud noise, form W038

Status: 06/2017